Honeywell Technologies GLA Series Adjustable Roller Lever Limit Switch, 1 NO/1 NC (SPDT), IP67, Die Cast Zinc Epoxy

N° de stock RS:: 311-2415
Numéro d'article Distrelec:: 301-38-711
Référence fabricant:: GLAB01A2B
Fabricant:: Honeywell

Honeywell Technologies GLA Series Adjustable Roller Lever Limit Switch, 1 NO/1 NC (SPDT), IP67, Die Cast Zinc Epoxy

Sous-total (1 unité)*

292,63 €

(TVA exclue)

354,08 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

25 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	292,63 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2415
Numéro d'article Distrelec:: 301-38-711
Référence fabricant:: GLAB01A2B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Adjustable Roller Lever
	IP Rating	IP67
	Contact Configuration	1 NO/1 NC (SPDT)
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	6A
	Series	GLA
	Switching DC Voltage	250V dc
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	85°C
	Length	145.8mm
	Standards/Approvals	UL, CSA, CE, CCC
	Depth	42mm
	Width	42mm
	Hazardous Area Certification	No
	Operating Force	9.5N
	Mechanical Life	15000000Cycles

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Adjustable Roller Lever
	IP Rating IP67
	Contact Configuration 1 NO/1 NC (SPDT)
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 6A
	Series GLA
	Switching DC Voltage 250V dc
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 85°C
	Length 145.8mm
	Standards/Approvals UL, CSA, CE, CCC
	Depth 42mm
	Width 42mm
	Hazardous Area Certification No
	Operating Force 9.5N
	Mechanical Life 15000000Cycles

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 145.8mm Length, 42mm Width - GLAB01A2B

This limit switch is a compact, rugged actuator designed to detect mechanical position changes within industrial control and automation systems. It provides a user‑actuated roller‑lever mechanism that converts motion into an electrical change, suitable for harsh environments where a sealed, long‑life switching device is required.

Features and Benefits:

• SPDT snap‑action contacts provide fast, reliable state change
• Rated switching AC voltage up to 600V for high‑voltage circuits
• DC switching capability to 250V and current handling to 6A for control loads
• Mechanical endurance of 15 million cycles for extended maintenance intervals
• Operating temperature range from −25 °C to 85 °C for varied site climates
• IP67 die‑cast zinc housing ensures ingress protection in wet conditions

Applications

• Suitable for actuation feedback on conveyor end‑stops in factories
• Ideal for position sensing of machine guards and doors
• Used with industrial contactors in motor control panels
• Can be used for limit detection in packaging and material handling
• Suitable for retrofitting into existing control cabinets requiring sealed switches

What actuator style does it use and how does that affect mounting options?

The unit employs an adjustable roller‑lever actuator that allows alignment and travel tuning to match mechanical linkages and varied mounting orientations.

How does the contact arrangement support control wiring schemes?

It provides a single‑pole double‑throw contact set giving both normally open and normally closed outputs to facilitate break‑before‑make logic or safety interlocks.

Which materials contribute to its durability in industrial settings?

The enclosure is manufactured from die‑cast zinc offering mechanical strength and resistance to impact while aiding environmental sealing.

What approvals are held that influence acceptance in installations?

It carries multiple standards approvals including UL, CSA, CE and CCC, which align with regulatory and safety assessment processes.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.