Carlo Gavazzi PS Series Key Safety Limit Switch, 1 NO/1 NC, IP65, Plastic Housing, 10A
- N° de stock RS:
- 276-3446
- Référence fabricant:
- PS42S-PT1105-T00
- Fabricant:
- Carlo Gavazzi
Sous-total (1 unité)*
32,51 €
(TVA exclue)
39,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 10 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 32,51 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 276-3446
- Référence fabricant:
- PS42S-PT1105-T00
- Fabricant:
- Carlo Gavazzi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Carlo Gavazzi | |
| Product Type | Safety Limit Switch | |
| Actuator Type | Key | |
| IP Rating | IP65 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Plastic | |
| Contact Type | Slow Action | |
| Terminal Type | Screw | |
| Switching Current | 10A | |
| Series | PS | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Length | 57mm | |
| Depth | 83mm | |
| Standards/Approvals | CSA, EN 60947-1, EN 60947-5-1, IEC 60947-1, IEC 60947-5-1, UL 508 | |
| Width | 33mm | |
| Hazardous Area Certification | NO | |
| Conduit Entry | PG13.5 | |
| Mounting Orientation | Any Position | |
| Operating Force | 15N | |
| Sélectionner tout | ||
|---|---|---|
Marque Carlo Gavazzi | ||
Product Type Safety Limit Switch | ||
Actuator Type Key | ||
IP Rating IP65 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Plastic | ||
Contact Type Slow Action | ||
Terminal Type Screw | ||
Switching Current 10A | ||
Series PS | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Length 57mm | ||
Depth 83mm | ||
Standards/Approvals CSA, EN 60947-1, EN 60947-5-1, IEC 60947-1, IEC 60947-5-1, UL 508 | ||
Width 33mm | ||
Hazardous Area Certification NO | ||
Conduit Entry PG13.5 | ||
Mounting Orientation Any Position | ||
Operating Force 15N | ||
- Pays d'origine :
- IT
The Carlo Gavazzi Safety Limit Switches are developed in order to be used for monitoring and protection of industrial machines, without inertia, in which down time is less than access time to the dangerous area. Use on sliding or pivoting protectors. To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors. The detection done by the relative axis or by means of a lever.
Precise operating points
Degree of protection IP65
High mechanical resistant
Positive opening operation
Minimum actuation force or torque
Immune to electromagnetic disturbances
Liens connexes
- Carlo Gavazzi PS Series Key Safety Limit Switch IP65 10 A
- Carlo Gavazzi PS Series Key Safety Limit Switch IP66 10 A
- Carlo Gavazzi PS Series Key Safety Limit Switch IP65 10 A
- Carlo Gavazzi UP62 Series Limit Switch
- Carlo Gavazzi VP Series level sensor Level Sensor Housing Plastic
- Carlo Gavazzi CD34CNFLFN Series Capacitive Sensor Level Sensor Housing Plastic
- Carlo Gavazzi CLD Series Conductive Level Sensor Housing Plastic
- Carlo Gavazzi