Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A
- N° de stock RS:
- 217-7103
- Numéro d'article Distrelec:
- 304-22-790
- Référence fabricant:
- 14CE1-Q
- Fabricant:
- Honeywell
Sous-total (1 unité)*
198,54 €
(TVA exclue)
240,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 26 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 198,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 217-7103
- Numéro d'article Distrelec:
- 304-22-790
- Référence fabricant:
- 14CE1-Q
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| Contact Configuration | SPDT | |
| IP Rating | IP66, IP65, IP67, IP68 | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Switching Current | 5A | |
| Series | 14CE | |
| Switching DC Voltage | 28V | |
| Minimum Operating Temperature | 0°C | |
| Switching AC Voltage | 250V | |
| Maximum Operating Temperature | 70°C | |
| Length | 16mm | |
| Standards/Approvals | CE, EN 60947-5-1 | |
| Width | 44mm | |
| Depth | 44mm | |
| Hazardous Area Certification | No | |
| Mounting Orientation | Side | |
| Operating Force | 11.8N | |
| Conduit Entry | 20 mm | |
| Mechanical Life | 10000000Cycles | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
Contact Configuration SPDT | ||
IP Rating IP66, IP65, IP67, IP68 | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Switching Current 5A | ||
Series 14CE | ||
Switching DC Voltage 28V | ||
Minimum Operating Temperature 0°C | ||
Switching AC Voltage 250V | ||
Maximum Operating Temperature 70°C | ||
Length 16mm | ||
Standards/Approvals CE, EN 60947-5-1 | ||
Width 44mm | ||
Depth 44mm | ||
Hazardous Area Certification No | ||
Mounting Orientation Side | ||
Operating Force 11.8N | ||
Conduit Entry 20 mm | ||
Mechanical Life 10000000Cycles | ||
Honeywell 14CE Series Limit Switch, 20mm Conduit Entry, Top Pin Plunger Actuator Type - 14CE1-Q
This limit switch is a compact, mechanically actuated device designed to detect position changes and provide reliable switching in industrial control systems. It is intended for gang mounting and offers snap-action contact operation with a top-mounted plunger actuator, suitable for environments requiring robust enclosure protection and routine switching of electrical loads.
Features and Benefits:
• Die-cast zinc housing delivers resilient enclosure protection
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response
Applications
• Suitable for conveyor end-of-travel detection in automation lines
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required
What electrical loads can it handle?
It switches AC loads up to 250V at 5A and DC loads up to 28 V, using a snap-action contact design suitable for typical control and signalling circuits.
How is the unit connected on-site?
Termination is via cable entry using a 20mm conduit interface, allowing straightforward field cabling and gland installation.
What temperature range is supported during operation?
The switch is designed to operate between 0 °C and 70 °C, accommodating common industrial ambient conditions.
Are there recognised standards applicable to its safety and performance?
It complies with EN 60947-5-1 and carries the CE designation, reflecting conformance to relevant European switch performance requirements.
Liens connexes
- Honeywell 14CE Series Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Top Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Plunger Limit Switch IP68 IP66 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Pin Plunger Limit Switch IP68 IP66 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Roller Plunger Limit Switch IP66 IP68 Die Cast Zinc Housing 5A
- Honeywell Plunger Limit Switch IP66 IP68, Die Cast Zinc Housing
- Honeywell 14CE Series Roller Plunger Limit Switch IP66 IP67 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Cross Roller Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing