Omron D4B-@N Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, Aluminium Housing, 400V ac, 2A

N° de stock RS:: 214-6717
Numéro d'article Distrelec:: 301-36-737
Référence fabricant:: D4B-2171N
Fabricant:: Omron

Omron D4B-@N Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, Aluminium Housing, 400V ac, 2A

Sous-total (1 unité)*

69,69 €

(TVA exclue)

84,32 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 2 unité(s) expédiée(s) à partir du 08 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	69,69 €

*Prix donné à titre indicatif

N° de stock RS:: 214-6717
Numéro d'article Distrelec:: 301-36-737
Référence fabricant:: D4B-2171N
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP67
	Housing Material	Aluminium
	Contact Type	Direct opening mechanism (NC contacts only)
	Terminal Type	M3.5 Terminal Screw
	Switching Current	2A
	Series	D4B-@N
	Switching AC Voltage	400V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	80°C
	Width	50mm
	Standards/Approvals	UL508, CSA C22.2 No. 14, EN60947-5-1, GB14048.5
	Length	72mm
	Depth	30mm
	Hazardous Area Certification	CCC, UL, CSA, EN
	Mounting Orientation	Multi Directional
	Mechanical Life	30000000Operations
	Conduit Entry	G 1/2

	Sélectionner tout
	Marque Omron
	Actuator Type Roller Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP67
	Housing Material Aluminium
	Contact Type Direct opening mechanism (NC contacts only)
	Terminal Type M3.5 Terminal Screw
	Switching Current 2A
	Series D4B-@N
	Switching AC Voltage 400V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 80°C
	Width 50mm
	Standards/Approvals UL508, CSA C22.2 No. 14, EN60947-5-1, GB14048.5
	Length 72mm
	Depth 30mm
	Hazardous Area Certification CCC, UL, CSA, EN
	Mounting Orientation Multi Directional
	Mechanical Life 30000000Operations
	Conduit Entry G 1/2

Se connecter pour voir les modèles CAO

Omron D4B-@N Series Limit Switch, 400V Switching AC Voltage, IP67 - D4B-2171N

This limit switch is a rugged actuator device for industrial position sensing and motion control, designed to operate in automated, electrical and mechanical systems. It provides mechanically actuated changeover contacts with a roller plunger actuator and sealed metal enclosure to withstand demanding factory environments while integrating into control circuits requiring both normally open and normally closed switching.

Features & Benefits

• Direct opening NC contacts reduce risk of welded-contact faults
• Rated for 400V switching at 2A for moderate AC loads
• IP67 sealed aluminium housing for protection against ingress
• Operates across −40 to 80°C for wide temperature ranges
• Multi‑directional mounting enables flexible panel orientation
• Mechanical life up to 30,000,000 operations for long service

Applications

• Suitable for machine guard position monitoring in assembly lines
• Ideal for conveyor end‑of‑travel detection and indexing control
• Used with motor starter circuits requiring changeover inputs
• Can be used for automated door position sensing in plant rooms
• Suitable for safety interlock feedback in mechanical presses

What conduit entry options does it offer for cabling?

The unit provides a G1/2 conduit entry for secure threaded cable glands and connector installation.

How are electrical connections MADE and secured?

Termination is via M3.5 Terminal screws compatible with 20 to 14 AWG (0.5 to 2.5 mm2) conductors and crimp Terminals tightened to the specified torque.

Which contact configuration is available and how does it behave?

It includes one normally open and one normally closed contact with a certified direct‑opening mechanism applied to the NC contact to force separation if contact welding occurs.

What mechanical attributes support installation and durability?

The body is aluminium with reinforced head sealing, provision for earth/ground screws, and a Compact depth of 30mm to suit confined mounting spaces.

What operational speeds and frequencies are supported?

The device is designed for operating speeds from 1 mm/s up to 0.5 m/s with mechanical operation rates around 120 operations/minute.