Telemecanique Sensors XCKP Series Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 10A
- N° de stock RS:
- 195-1679
- Référence fabricant:
- XCKP2111P16
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
41,70 €
(TVA exclue)
50,46 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s)
- Plus 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 41,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 195-1679
- Référence fabricant:
- XCKP2111P16
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP67, IP66 | |
| Housing Material | Plastic | |
| Contact Type | Snap Action | |
| Terminal Type | M16 | |
| Switching Current | 10A | |
| Series | XCKP | |
| Switching DC Voltage | 250V dc | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 240V ac | |
| Maximum Operating Temperature | 70°C | |
| Depth | 30mm | |
| Length | 65mm | |
| Standards/Approvals | RoHS | |
| Width | 31mm | |
| Hazardous Area Certification | No | |
| Mounting Orientation | Cable | |
| Operating Force | 15mN | |
| Conduit Entry | M20 | |
| Mechanical Life | 15000000Cycles | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP67, IP66 | ||
Housing Material Plastic | ||
Contact Type Snap Action | ||
Terminal Type M16 | ||
Switching Current 10A | ||
Series XCKP | ||
Switching DC Voltage 250V dc | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 240V ac | ||
Maximum Operating Temperature 70°C | ||
Depth 30mm | ||
Length 65mm | ||
Standards/Approvals RoHS | ||
Width 31mm | ||
Hazardous Area Certification No | ||
Mounting Orientation Cable | ||
Operating Force 15mN | ||
Conduit Entry M20 | ||
Mechanical Life 15000000Cycles | ||
Telemecanique Sensors XCKP Series Limit Switch, IP67, 15000000 Cycles Mechanical Life - XCKP2111P16
This limit switch is a Compact mechanical sensor designed to provide positive position feedback in industrial control systems. It operates using a plunger actuator and is intended for installation where a durable, cable-mounted switching device is required. The unit offers a sealed housing suitable for use in environments where ingress protection is necessary and supports both AC and DC switching requirements.
Features and Benefits:
• 1 NO 1 NC snap-action switch for clear state change and contact reliability
• Switching capability up to 250V DC at 10 A for a range of DC loads
• Rated for 240V AC switching to handle common AC control circuits
• Mechanical life of 15,000,000 cycles to reduce maintenance intervals
• Wide operating temperature range from -25 °C to 70 °C for varied climates
• M16 Terminal with M20 conduit entry for straightforward cable routing
• Switching capability up to 250V DC at 10 A for a range of DC loads
• Rated for 240V AC switching to handle common AC control circuits
• Mechanical life of 15,000,000 cycles to reduce maintenance intervals
• Wide operating temperature range from -25 °C to 70 °C for varied climates
• M16 Terminal with M20 conduit entry for straightforward cable routing
Applications
• Suitable for conveyor end-of-travel detection in factory automation
• Ideal for safety interlocks on access panels and guards
• Used with motor starters to confirm mechanical limit positions
• Can be used for position sensing on packaging machinery
• Suitable for retrofit on existing control cabinets needing sealed switches
• Ideal for safety interlocks on access panels and guards
• Used with motor starters to confirm mechanical limit positions
• Can be used for position sensing on packaging machinery
• Suitable for retrofit on existing control cabinets needing sealed switches
What is the housing material and why does it matter?
The enclosure is plastic, which provides electrical insulation and reduces weight for easier handling during installation.
How is the unit mounted and wired into a system?
It is designed for cable mounting and connects via an M16 Terminal with a separate M20 conduit entry for protective cabling.
Does the switch carry hazardous area certification?
It does not carry hazardous area approval and should not be specified for classified atmospheres.
What approval or standard is noted for material restrictions?
The component conforms to RoHS requirements regarding restricted substances in electrical equipment.
Liens connexes
- Telemecanique Sensors XCKP Series Plunger Limit Switch IP67 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Plunger Limit Switch IP66 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Roller Plunger Limit Switch IP67 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Roller Plunger Limit Switch IP66 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Lever Limit Switch IP67 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Lever Limit Switch IP66 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Roller Lever Limit Switch IP67 Plastic Housing 10A
- Telemecanique Sensors XCKP Series Roller Lever Limit Switch IP66 Plastic Housing 10A