Telemecanique Sensors XCKJ Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 50V ac, 3A
- N° de stock RS:
- 195-1667
- Référence fabricant:
- XCKJ167
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
100,20 €
(TVA exclue)
121,24 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 85 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 7 unité(s) expédiée(s) à partir du 21 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 100,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 195-1667
- Référence fabricant:
- XCKJ167
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Limit Switch | |
| Actuator Type | Roller Plunger | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP66 | |
| Housing Material | Zamak | |
| Contact Type | Snap Action | |
| Switching Current | 3A | |
| Terminal Type | Screw Clamp | |
| Series | XCKJ | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 50V ac | |
| Switching DC Voltage | 50V dc | |
| Maximum Operating Temperature | 70°C | |
| Width | 40mm | |
| Depth | 44mm | |
| Length | 40mm | |
| Standards/Approvals | RoHS | |
| Hazardous Area Certification | No | |
| Conduit Entry | PG13 | |
| Mechanical Life | 25000000Cycles | |
| Mounting Orientation | Cable | |
| Operating Force | 40N | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Limit Switch | ||
Actuator Type Roller Plunger | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP66 | ||
Housing Material Zamak | ||
Contact Type Snap Action | ||
Switching Current 3A | ||
Terminal Type Screw Clamp | ||
Series XCKJ | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 50V ac | ||
Switching DC Voltage 50V dc | ||
Maximum Operating Temperature 70°C | ||
Width 40mm | ||
Depth 44mm | ||
Length 40mm | ||
Standards/Approvals RoHS | ||
Hazardous Area Certification No | ||
Conduit Entry PG13 | ||
Mechanical Life 25000000Cycles | ||
Mounting Orientation Cable | ||
Operating Force 40N | ||
Telemecanique Sensors XCKJ Series Limit Switch, IP66, 1 NO/1 NC Contact Configuration - XCKJ167
This limit switch is a Compact industrial actuator used to detect position and initiate electrical switching in automated systems. It combines a roller plunger actuator with a snap‑action switching mechanism and is designed for cable-mounted installations where robust electrical connections and consistent contact behaviour are required.
Features and Benefits:
• Snap‑action contacts deliver fast electrical transition and precise control
• 1NO1NC configuration enables both make and break signalling
• 3 A switching current supports modest control and signalling loads
• 40N operating force permits reliable actuation under mechanical load
• IP66 ingress protection allows operation in dusty and water‑jet environments
• Mechanical endurance rated to 25,000,000 cycles for long operational life
• 1NO1NC configuration enables both make and break signalling
• 3 A switching current supports modest control and signalling loads
• 40N operating force permits reliable actuation under mechanical load
• IP66 ingress protection allows operation in dusty and water‑jet environments
• Mechanical endurance rated to 25,000,000 cycles for long operational life
Applications
• Suitable for end‑of‑travel detection on conveyor drives
• Ideal for interlock signalling on motorised gates
• Used for position feedback in packaging machinery
• Can be used for safety sensing on industrial presses
• Used with control panels requiring screw‑terminal wiring
• Ideal for interlock signalling on motorised gates
• Used for position feedback in packaging machinery
• Can be used for safety sensing on industrial presses
• Used with control panels requiring screw‑terminal wiring
What wiring method does it use for electrical connections?
It employs screw clamp terminals to secure conductors and facilitate straightforward field wiring.
How is the device mounted and protected from external cable routing?
The unit accepts a PG13 conduit entry for cable or conduit attachment and is intended for cable‑oriented mounting orientation.
What materials contribute to structural durability?
The enclosure is formed from Zamak, providing a metal housing that balances strength with economical mass.
What environmental temperature range can it operate within?
It is specified for use from -25 °C up to a maximum of 70 °C for typical industrial ambient conditions.
Which voltages can be switched by the contacts?
The contacts are suitable for switching up to 50V AC and up to 50V DC within the stated current rating.
Liens connexes
- Telemecanique Sensors XCKJ Series Plunger Limit Switch IP66 50V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Plunger Limit Switch IP66 50V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Plunger Limit Switch IP66 240V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Lever Limit Switch IP66 50V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Lever Limit Switch IP66 50V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Plunger Limit Switch IP66 240V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Lever Limit Switch IP66 50V ac, 3A
- Telemecanique Sensors XCKJ Series Roller Plunger Limit Switch IP66 3V ac, 50A