Telemecanique Sensors XCSM Series Roller Plunger Safety Limit Switch, 2 NO/2 NC, IP66, IP67, IP68, Metal Housing, 400V

N° de stock RS:: 133-0061
Numéro d'article Distrelec:: 304-10-785
Référence fabricant:: XCSM4102L5
Fabricant:: Telemecanique Sensors

Telemecanique Sensors XCSM Series Roller Plunger Safety Limit Switch, 2 NO/2 NC, IP66, IP67, IP68, Metal Housing, 400V

Sous-total (1 unité)*

161,50 €

(TVA exclue)

195,42 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

8 unité(s) prête(s) à être expédiée(s)
Plus 30 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	161,50 €

*Prix donné à titre indicatif

N° de stock RS:: 133-0061
Numéro d'article Distrelec:: 304-10-785
Référence fabricant:: XCSM4102L5
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Safety Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	2 NO/2 NC
	IP Rating	IP66, IP67, IP68
	Housing Material	Metal
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Pre-Cabled
	Series	XCSM
	Switching AC Voltage	400V ac
	Switching DC Voltage	300V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	CSA, UL
	Length	70mm
	Depth	16mm
	Width	30mm
	Hazardous Area Certification	No
	Operating Force	7N
	Mechanical Life	10000000Cycles
	Conduit Entry	M20
	Mounting Orientation	Horizontal

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Safety Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration 2 NO/2 NC
	IP Rating IP66, IP67, IP68
	Housing Material Metal
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Pre-Cabled
	Series XCSM
	Switching AC Voltage 400V ac
	Switching DC Voltage 300V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals CSA, UL
	Length 70mm
	Depth 16mm
	Width 30mm
	Hazardous Area Certification No
	Operating Force 7N
	Mechanical Life 10000000Cycles
	Conduit Entry M20
	Mounting Orientation Horizontal

Se connecter pour voir les modèles CAO

Telemecanique Sensors XCSM Series Safety Limit Switch, IP66/IP67/ IP68, 2 NO/2 NC Contact Configuration - XCSM4102L5

This safety limit switch provides a robust electromechanical means of detecting actuator travel and initiating machine safety or control responses in industrial environments. It uses a roller plunger actuator to convert mechanical motion into snap-action contact changes, intended for horisontal mounting on equipment where ingress protection and dependable switching are required.

Features and Benefits:

• Metal housing resists mechanical damage for extended service life
• 2NO/2NC snap action contacts deliver clear make/break signals
• Switching capability up to 300V DC and 6A supports varied circuits
• Pre-cabled design with M20 conduit entry simplifies installation
• Rated for 10000000 cycles for long-term operational duty
• Operates between -25°C and 70°C for broad environmental range

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for guarding interlocks on assembly-line machinery
• Used for position sensing on packaging equipment
• Can be used for safety monitoring of industrial presses

How is the switch mounted and routed on machinery?

It is designed for horisontal mounting and features an M20 conduit entry for secure cable routing and conduit connection.

What contact arrangement is provided for safety circuits?

It offers two normally open and two normally closed contacts arranged for snap-action switching to facilitate safety and control circuit layouts.

How does the unit perform in wet or dusty environments?

The enclosure meets high ingress protection levels enabling operation in environments requiring IP66, IP67 and IP68 resistance to dust and water.

What electrical standards does it comply with for use in installations?

The unit has approvals from recognised North American safety bodies to meet specified installation requirements.

What actuation force should be expected during use?

The roller plunger requires an operating force of 7 N to actuate the contact mechanism.