Telemecanique Sensors XCKN Series Roller Plunger Limit Switch, 1 NO/1 NC, IP65, Plastic Housing, 240V ac, 10A

N° de stock RS:: 125-8457
Référence fabricant:: XCKN2102P20
Fabricant:: Telemecanique Sensors

Telemecanique Sensors XCKN Series Roller Plunger Limit Switch, 1 NO/1 NC, IP65, Plastic Housing, 240V ac, 10A

Sous-total (1 unité)*

24,36 €

(TVA exclue)

29,48 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

20 unité(s) prête(s) à être expédiée(s)
Plus 92 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	24,36 €

*Prix donné à titre indicatif

N° de stock RS:: 125-8457
Référence fabricant:: XCKN2102P20
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP65
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Screw Clamp
	Switching Current	10A
	Series	XCKN
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	RoHS
	Depth	30mm
	Width	30mm
	Length	30mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Operating Force	12N
	Conduit Entry	1 Cable Gland x M20 x 1.5

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP65
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Screw Clamp
	Switching Current 10A
	Series XCKN
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals RoHS
	Depth 30mm
	Width 30mm
	Length 30mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Operating Force 12N
	Conduit Entry 1 Cable Gland x M20 x 1.5

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Telemecanique Sensors XCKN Series Limit Switch, IP65, 10A Switching Current - XCKN2102P20

This limit switch is a Compact actuator designed to detect mechanical motion and provide an electrical changeover in industrial control systems. It uses a roller plunger actuator and a snap-action contact mechanism to deliver reliable switching for automation and safety interlocks. The enclosure is constructed from plastic with an ingress protection rating suitable for exposed locations, and it accepts a single cable gland for conduit entry.

Features and Benefits:

• Snap-action contacts offering 10A switching capacity at 240V AC
• Dual contact arrangement providing both normally open and closed outputs
• Robust switching life rated to 10,000,000 cycles for extended service
• Operates across -25°C to 70°C covering varied plant environments
• Requires 12N operating force for consistent actuation response
• Screw-clamp terminals ensure secure wiring termination under vibration

Applications

• Suitable for position sensing on conveyor stops and gates
• Ideal for end-of-travel detection on pneumatic cylinders
• Used with access-door interlocks in control panels
• Can be used for machine tool limit and homing routines
• Suitable for signal feedback in packaging and pick-and-place systems

What conduit connection does it require for cable entry?

It accepts one cable gland sized M20x1.5 for a single incoming cable run.

How does the contact configuration support control logic?

It provides one normally open and one normally closed contact to enable direct signalling and safety circuits.

What Terminal type is provided for electrical connections?

The device uses screw-clamp terminals to secure conductor connection and resist loosening under vibration.

How Compact is the switch for installations with limited space?

The unit measures 30mm in both length and width, allowing tight mounting in confined assemblies.