Références fabricant

Osram 40 W Electronic Fluorescent Lighting Ballast, 220 → 240 V

N° de stock RS:: 873-5038
Référence fabricant:: QTP-OPTIMAL 2x18-40
Fabricant:: Osram

Osram 40 W Electronic Fluorescent Lighting Ballast, 220 → 240 V

Sous-total (1 unité)*

24,83 €

(TVA exclue)

30,04 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

Temporairement en rupture de stock

2 unité(s) expédiée(s) à partir du 02 mars 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	24,83 €

*Prix donné à titre indicatif

N° de stock RS:: 873-5038
Référence fabricant:: QTP-OPTIMAL 2x18-40
Fabricant:: Osram

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Osram
	Product Type	Lighting Ballast
	Number of Lamps	2
	Ballast Type	Electronic
	Compatible Lamp Type	Fluorescent
	Voltage	220 → 240 V
	Dimmable	No
	High Frequency	Yes
	Length	360mm
	Minimum Operating Temperature	-20°C
	Compatible Lamp Designation	T5
	Lighting Power	40 W
	Maximum Operating Temperature	50°C
	Width	30 mm
	Standards/Approvals	VDE, VDE EMC, IEC 61547, IEC 61347-2-3, IEC 61000-3-2, ENEC 10, EN 55015:2006+A1:2007+A2:2009, EL, EAC, CE
	Height	21mm
	Series	QUICKTRONIC

	Sélectionner tout
	Marque Osram
	Product Type Lighting Ballast
	Number of Lamps 2
	Ballast Type Electronic
	Compatible Lamp Type Fluorescent
	Voltage 220 → 240 V
	Dimmable No
	High Frequency Yes
	Length 360mm
	Minimum Operating Temperature -20°C
	Compatible Lamp Designation T5
	Lighting Power 40 W
	Maximum Operating Temperature 50°C
	Width 30 mm
	Standards/Approvals VDE, VDE EMC, IEC 61547, IEC 61347-2-3, IEC 61000-3-2, ENEC 10, EN 55015:2006+A1:2007+A2:2009, EL, EAC, CE
	Height 21mm
	Series QUICKTRONIC

Osram Quicktronic Professional Optimal Lighting Ballast

Introducing the Quicktronic Professional lighting ballast from Osram, this is an electronic control gear (ECG) for fluorescent and compact fluorescent lamps. Using an ECG can guarantee a long lamp life and isn't affected by constant switching on and off. The cut-off technology that it uses can not only prolong the life of the lamp but reduces the cost for maintenance and has very high energy efficiency.

Features and Benefits

Long lamp life

No adverse effect from frequent on/off switching

Automatic restart after lamp replacement

Perfect lamp start for applications with motion sensors

Very high energy efficiency due to cut-off technology

Supply voltage: 220-240V

Line voltage: 198-264V

Line frequency: 0 Hz | 50 Hz | 60 Hz

Lamp start with optimum filament preheating

Lifetime: up to 100,000 hours

Energy Efficiency Index EEI: A2 BAT

Automatic shutdown of defective lamps and at end of life

Typical Applications

Lighting ballasts aid the initial start-up of fluorescent and compact fluorescent lamps, as they can provide it with the correct voltage and running of the lamp. These can be used in:

Offices

Factories

Warehouses

Public buildings

Modernisation of existing systems

Osram Quicktronic Optimal Alternatives

873-5035 - 1 x 18 W Lamps

873-5038 - 2 x 18 W Lamps

873-5032 - 1 x 58 W Lamps

873-5041 - 2 x 54 W Lamps

Approvals

VDE/VDE EMC

Standards

EN 61347-2-3, EN 60929