ELT 54 W, 55 W, 58 W Electronic Fluorescent Lighting Ballast, 220 → 240 V
- N° de stock RS:
- 778-5284
- Référence fabricant:
- BE 258-2
- Fabricant:
- ELT
Indisponible
RS n'aura plus ce produit en stock.
- N° de stock RS:
- 778-5284
- Référence fabricant:
- BE 258-2
- Fabricant:
- ELT
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ELT | |
| Wattage | 54 W, 55 W, 58 W | |
| Ballast Type | Electronic | |
| Supported Lamp Shape | T5, T8, TC-L | |
| Supported Lamp Type | Fluorescent | |
| Voltage Rating | 220 → 240 V | |
| Dimmable | No | |
| High Frequency | Yes | |
| Length | 230 mm | |
| Width | 40 mm | |
| Height | 28mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | +50°C | |
| Sélectionner tout | ||
|---|---|---|
Marque ELT | ||
Wattage 54 W, 55 W, 58 W | ||
Ballast Type Electronic | ||
Supported Lamp Shape T5, T8, TC-L | ||
Supported Lamp Type Fluorescent | ||
Voltage Rating 220 → 240 V | ||
Dimmable No | ||
High Frequency Yes | ||
Length 230 mm | ||
Width 40 mm | ||
Height 28mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +50°C | ||
- Pays d'origine :
- ES
Multi Watt High Frequency Ballast
ELT high frequency ballast, Class I for built-in use. This multipower electronic ballast Operates two T8 lamps.
Class I for built in use
Ignition with pre-heating in cathodes for long lamp life without flashes and flickering
Constant total power and stabilized luminous flux
High frequency operation and high energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires
Permitted input voltage 198-264V, 50-60Hz
Withstands 2 hours at 350V ac
Rapid connection with fixing spring
Ignition with pre-heating in cathodes for long lamp life without flashes and flickering
Constant total power and stabilized luminous flux
High frequency operation and high energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires
Permitted input voltage 198-264V, 50-60Hz
Withstands 2 hours at 350V ac
Rapid connection with fixing spring
