SICK Photoelectric Retro-Reflective Sensor WLG12 Series
- N° de stock RS:
- 285-9100
- Référence fabricant:
- WLG12-P537
- Fabricant:
- SICK
Sous-total (1 unité)*
953,39 €
(TVA exclue)
1 153,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 15 décembre 2025
- Plus 15 unité(s) expédiée(s) à partir du 15 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 953,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-9100
- Référence fabricant:
- WLG12-P537
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Detection Range | 1.5 m | |
| Sensor Principle | Photoelectric Retro-Reflective Sensor | |
| Beam Separation | 12.5mm | |
| Component Type | Photoelectric Retro-Reflective Sensor | |
| Light Source | LED | |
| Length | 106mm | |
| Width | 62mm | |
| Depth | 46.6mm | |
| Series | WLG12 | |
| IP Rating | IP67 | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Detection Range 1.5 m | ||
Sensor Principle Photoelectric Retro-Reflective Sensor | ||
Beam Separation 12.5mm | ||
Component Type Photoelectric Retro-Reflective Sensor | ||
Light Source LED | ||
Length 106mm | ||
Width 62mm | ||
Depth 46.6mm | ||
Series WLG12 | ||
IP Rating IP67 | ||
- Pays d'origine :
- HU
Overview
The WLG is a retro-reflective light grid with a 100 mm detection height and transmission 8 LEDs. Detecting damaged pallets, leading edge detection, checking the edges of material webs and detecting and sorting bottles are the typical areas of application
At the same time, depending on the set sensitivity, the WLG detects objects which are only 6 mm large at a distance of 0.4 m. Transparent objects and reflective surfaces are also reliably detected.
At a glance
0.6 ms response time
Eight visible transmitter LEDs
Up to eight PNP switching outputs and one alarm output
Sensitivity can be set via a potentiometer
Polarizing filter for reflective surfaces
Eight visible transmitter LEDs
Up to eight PNP switching outputs and one alarm output
Sensitivity can be set via a potentiometer
Polarizing filter for reflective surfaces
Your Benefit
The fast response time of the WLG means that increased conveyor speeds can be used
Increased availability thanks to the reliable detection of transparent objects
Savings in terms of cost and space thanks to the use of a reflector
A polarizing filter incre
Increased availability thanks to the reliable detection of transparent objects
Savings in terms of cost and space thanks to the use of a reflector
A polarizing filter incre
Applications
Note
Liens connexes
- SICK Photoelectric Retro-Reflective Sensor WLG12 Series
- SICK Photoelectric Retro-Reflective Sensor PLG3 Series
- SICK Photoelectric Retro-Reflective Sensor PLG6 Series
- SICK Photoelectric Retro-Reflective Sensor GL6 Series
- SICK Photoelectric Retro-Reflective Photoelectric Sensor 5 m Detection Range
- SICK Photoelectric Retro-Reflective Photoelectric Sensor 1.2 m Detection Range
- retro-reflective photoelectric
- SICK Reflector for Use with Retro-Reflective Sensors
