SICK C2MT Series Light Curtain Receiver, Sender, 34 mm Resolution

N° de stock RS:: 701-2965
Référence fabricant:: C2MT-09034BBC03FE0
Fabricant:: SICK

Sous-total (1 unité)*

667,05 €

(TVA exclue)

807,13 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	667,05 €

*Prix donné à titre indicatif

N° de stock RS:: 701-2965
Référence fabricant:: C2MT-09034BBC03FE0
Fabricant:: SICK

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SICK
	Product Type	Light Curtain
	Series	C2MT
	Beam Resolution	34mm
	Component Type	Receiver, Sender
	Safety Type	Type 2
	Standards/Approvals	ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height	900mm
	Maximum Supply Voltage	24V dc
	Maximum Protective Width	8m
	Minimum Scanning Distance	0μm
	Maximum Scanning Distance	8m
	Width	15mm
	Length	32mm
	Maximum Response Time	13ms
	Height	900mm
	Terminal Type	5-Pin M12

	Sélectionner tout
	Marque SICK
	Product Type Light Curtain
	Series C2MT
	Beam Resolution 34mm
	Component Type Receiver, Sender
	Safety Type Type 2
	Standards/Approvals ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height 900mm
	Maximum Supply Voltage 24V dc
	Maximum Protective Width 8m
	Minimum Scanning Distance 0μm
	Maximum Scanning Distance 8m
	Width 15mm
	Length 32mm
	Maximum Response Time 13ms
	Height 900mm
	Terminal Type 5-Pin M12

Pays d'origine :: DE

SICK C2MT Series Light Curtain, 900mm Protective Height, 8m Maximum Protective Width - C2MT-09034BBC03FE0

This light curtain is a safety receiver designed for safeguarding access to hazardous machinery by forming an infrared protective field. It operates as a standalone unit or as the final device in 2- or 3-device cascades, with optical synchronisation and hard-wired configuration. The device is enclosed in an aluminium-alloy housing and is suited to industrial environments where non-contact presence detection and machine stoppage are required.

Features and Benefits:

• 34mm beam resolution for precise object detection and smaller intrusion recognition
• ≤13ms response time for Rapid fault-to-stop performance
• 24V DC supply compatibility supporting standard control systems
• Optical synchronisation enabling operation without additional sync wiring
• PNP OSSD outputs with cross-circuit monitoring for safe switching

Applications

• Suitable for guarding production line access points
• Ideal for integration with safety relays in machinery controls
• Used with cascaded systems for extended protection fields
• Can be used for presence detection in automated cells
• Suitable for installations requiring IP65 environmental protection

What voltage range does it accept for supply?

It accepts 24V DC with an operating range of 19.2V DC to 28.8V DC.

How are the output signals presented for machine control?

Outputs are PNP semiconductors configured as OSSDs with short-circuit protection and cross-circuit monitoring.

What environmental conditions can it withstand?

It is rated IP65 and operates between -20°C and +55°C with non-condensing humidity tolerance.

How is the device connected to a control system?

System connection uses a 5-pin M12 plug with a 700mm cable fitted and a permitted cable length up to 20m depending on load.

What safety classifications apply to its design?

It is Type 2 (IEC 61496-1) with SIL1 and Category 2 assessments and a PL c performance level.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978