Cynergy3 ILLS Series Pressure Level Transmitter, 28 mA, 32 V dc, 10 bar
- N° de stock RS:
- 869-7655
- Numéro d'article Distrelec:
- 304-02-366
- Référence fabricant:
- ILLS-G0500-5-007
- Fabricant:
- Cynergy3
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
274,55 €
(TVA exclue)
332,21 €
(TVA incluse)
- N° de stock RS:
- 869-7655
- Numéro d'article Distrelec:
- 304-02-366
- Référence fabricant:
- ILLS-G0500-5-007
- Fabricant:
- Cynergy3
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Cynergy3 | |
| Product Type | Level Transmitter | |
| Device Type | Pressure | |
| Mount Type | Cable | |
| Housing Material | Stainless Steel | |
| Cable Length | 7m | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Maximum DC Voltage | 32V dc | |
| Maximum Current | 28mA | |
| Maximum Pressure | 10bar | |
| Gasket Material | Viton | |
| Standards/Approvals | No | |
| Series | ILLS | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Cynergy3 | ||
Product Type Level Transmitter | ||
Device Type Pressure | ||
Mount Type Cable | ||
Housing Material Stainless Steel | ||
Cable Length 7m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Maximum DC Voltage 32V dc | ||
Maximum Current 28mA | ||
Maximum Pressure 10bar | ||
Gasket Material Viton | ||
Standards/Approvals No | ||
Series ILLS | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- GB
Sensata Cynergy3 Level Transmitter, 7m, 28mA - ILLS Series - ILLS-G0500-5-007
Use this Sensata Cynergy3 level transmitter for a precise way to monitor changes in liquid levels inside your tank. It's simple to install and can be lowered into the tank from the top using the supplied cable.
The AC (alternating current) electrode pair inside the transmitter converts the piezo-resistive probes pressure readings into an electrical current. This produces a signal corresponding with the liquid level that's transmitted through the cable to give a precise reading. The cable compensates for any fluctuations in the readings by sending atmospheric pressure to the sensor for greater accuracy.
Features & Benefits
• Corrosion-resistant stainless steel body material for long-lasting performance
• Long cable length of 7m for deep submersion in large tanks
• Broad operating temperature range of -20°C to +60°C for use in harsh environments
• Typical transmission error of less than 0.5% of the final value for high levels of accuracy
Liens connexes
- Cynergy3 ILS Series Pressure Level Transmitter 32 V dc, 50 bar
- Flowline US03 Series Reflective Ultrasonic Liquid Level Transmitter Level Transmitter 28 V dc, 2 bar
- Flowline US01 Series Reflective Ultrasonic Liquid Level Transmitter Level Transmitter 28 V dc, 2 bar
- Flowline UG06 Series Reflective Ultrasonic Liquid Level Transmitter Level Transmitter 28 V dc, 2 bar
- Flowline US06 Series Reflective Ultrasonic Liquid Level Transmitter Level Transmitter 28 V dc, 2 bar
- Flowline UG01 Series Reflective Ultrasonic Multi-Function Liquid Level Transmitter Level Transmitter 28 V dc, 2
- Flowline UG03 Series Reflective Ultrasonic Multi-Function Liquid Level Transmitter Level Transmitter 28 V dc, 2
- Cynergy3 OLS2 Series Optical Sensor Level Switch 28 V dc, 7 bar

