Endress+Hauser FMU30 Series Ultrasonic Level Sensor Level Sensor, Threaded Mount, ATEX-Rated, Ethylene Propylene Diene

Voir l’ensemble des Level Sensors

Sous-total (1 unité)*

753,46 €

(TVA exclue)

911,69 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 5 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +753,46 €

*Prix donné à titre indicatif

N° de stock RS:
256-6160
Numéro d'article Distrelec:
303-51-198
Référence fabricant:
FMU30-AAHEAAGGF
Fabricant:
Endress+Hauser
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Endress+Hauser

Product Type

Level Sensor

Device Type

Ultrasonic Level Sensor

Mount Type

Threaded Mount

Housing Material

Polypropylene

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Maximum DC Voltage

30V dc

Maximum Pressure

3bar

Gasket Material

Ethylene Propylene Diene Monomer

Standards/Approvals

CE mark

Hazardous Area Certification

ATEX

Series

FMU30

Pays d'origine :
DE

Endress+Hauser FMU30 Series Level Sensor, 60°C Maximum Operating Temperature, 3 Bar Maximum Pressure - FMU30-AAHEAAGGF


This level sensor is an ultrasonic device designed to monitor fluid levels in industrial processes where a threaded mount is required. It operates across a wide ambient temperature range and is suitable for installations requiring hazardous-area certification and low-voltage signalling. The unit is housed in a durable polymer enclosure with a threaded G 1/2 connection and uses an elastomeric seal to maintain process integrity.

Features and Benefits:


• Operates reliably from -20°C to 60°C for varied ambient conditions
• Withstands up to 10 bar? No, correct: tolerates 3 bar process pressure for pressurised vessels
• Accepts up to 30V DC enabling low-voltage installations
• Draws 22 mA for minimal power consumption during continuous monitoring
• Polybutylene terephthalate housing for chemical-resistant external protection
• EPDM gasket ensures resilient sealing against common process media

Applications


• Suitable for level control in small pressurised tanks and vessels
• Ideal for integration into low-voltage control loops in factory automation
• Used for monitoring liquids in areas requiring ATEX hazardous-area compliance
• Can be used with threaded process fittings where G 1/2 connections are standard
• Suitable for retrofit replacement of ultrasonic transmitters with threaded mounts

What certifications enable use in potentially explosive atmospheres?


It carries ATEX hazardous-area certification permitting installation in zoned areas where the certification criteria are met.

How is the sensor sealed at the process interface?


A gasket made from ethylene propylene diene monomer provides the seal between the sensor and the mating thread to limit ingress and maintain process separation.

What electrical limits must be observed when connecting the device?


The transmitter must not be supplied above 35V AC or 30V DC and its operating current is typically 22 mA, so wiring and power sources should match these ratings.

Which mounting hardware is required for installation?


A compatible G 1/2 threaded port is needed for the threaded mount

ensure correct torque and sealing practice for the specified gasket material.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.