Baumer PL20H Series Level Detector Level Sensor, Screw, Ethylene Propylene Diene Monomer, Fluorelastomer, Nitrile Rubber
- N° de stock RS:
- 210-0728
- Référence fabricant:
- PL20H-11111.111012.A03021030030
- Fabricant:
- Baumer
Sous-total (1 unité)*
195,49 €
(TVA exclue)
236,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 195,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 210-0728
- Référence fabricant:
- PL20H-11111.111012.A03021030030
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Device Type | Level Detector | |
| Product Type | Level Sensor | |
| Mount Type | Screw | |
| Housing Material | Stainless Steel | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Interface Type | IO-Link | |
| Maximum DC Voltage | 35V dc | |
| Maximum Current | 53mA | |
| Maximum Pressure | 10bar | |
| Gasket Material | Ethylene Propylene Diene Monomer, Fluorelastomer, Nitrile Rubber (NBR) | |
| Standards/Approvals | EHEDG, FDA | |
| Hazardous Area Certification | No | |
| Series | PL20H | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Device Type Level Detector | ||
Product Type Level Sensor | ||
Mount Type Screw | ||
Housing Material Stainless Steel | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Interface Type IO-Link | ||
Maximum DC Voltage 35V dc | ||
Maximum Current 53mA | ||
Maximum Pressure 10bar | ||
Gasket Material Ethylene Propylene Diene Monomer, Fluorelastomer, Nitrile Rubber (NBR) | ||
Standards/Approvals EHEDG, FDA | ||
Hazardous Area Certification No | ||
Series PL20H | ||
- Pays d'origine :
- DK
The Baumer adaptive trigger PL20H used Point level detection based on frequency deviation technology in the hygiene sector. It has PNP output closure (NO)/(NC) by connector M12-A which has 4-pin and used stainless steel material. It used G 1/2 A hygienic which gives maximum process pressure 10 bar.
Operating temperature range -25 to 80 °C
Degree of protection IP 67
Liens connexes
- Baumer PL20H Series Level Detector Level Sensor Ethylene Propylene Diene Monomer Nitrile
- Baumer PL20S Series Level Detector Level Sensor Ethylene Propylene Diene Monomer Nitrile
- Baumer PL20S Series Level Detector Level Sensor Nitrile Rubber (NBR) Ethylene Propylene
- SICK LXRC Series level sensor Level Sensor Ethylene Propylene Diene Monomer, Housing Stainless Steel
- Endress+Hauser FMI21 Series Capacitive Level Sensor Level Sensor Ethylene Propylene Diene Monomer,
- Endress+Hauser Liquiphant FTL43 Series Vibration Level Switch Level Sensor Ethylene Propylene Diene Monomer,
- Siemens SITRANS LCS050 Series Capacitive Level Switch Level Switch Ethylene Propylene Diene Monomer, Housing
- Vega VEGASON 62 Series Ultrasonic Level Probe Housing Aluminium