ATMI SOLIBA Series Tilt Level Switch Level Switch, Cable, ATEX-Rated, Housing Copolymer Polypropylene
- N° de stock RS:
- 208-5496
- Référence fabricant:
- SOLIBA10M
- Fabricant:
- ATMI
Sous-total (1 unité)*
235,61 €
(TVA exclue)
285,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 4 unité(s) expédiée(s) à partir du 17 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 235,61 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-5496
- Référence fabricant:
- SOLIBA10M
- Fabricant:
- ATMI
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ATMI | |
| Product Type | Level Switch | |
| Device Type | Tilt Level Switch | |
| Mount Type | Cable | |
| Housing Material | Copolymer Polypropylene | |
| Cable Length | 10m | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | 85°C | |
| Maximum AC Voltage | 250V ac | |
| Maximum DC Voltage | 250V dc | |
| Standards/Approvals | No | |
| Hazardous Area Certification | ATEX | |
| Series | SOLIBA | |
| Sélectionner tout | ||
|---|---|---|
Marque ATMI | ||
Product Type Level Switch | ||
Device Type Tilt Level Switch | ||
Mount Type Cable | ||
Housing Material Copolymer Polypropylene | ||
Cable Length 10m | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature 85°C | ||
Maximum AC Voltage 250V ac | ||
Maximum DC Voltage 250V dc | ||
Standards/Approvals No | ||
Hazardous Area Certification ATEX | ||
Series SOLIBA | ||
- Pays d'origine :
- FR
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
Cut out power 20A
Maximum temperature 85 °C
Protection index IP68
Liens connexes
- ATMI SOLIBA Series Tilt Level Switch Level Switch ATEX-Rated, Housing Copolymer Polypropylene
- ATMI SOLIBA EX Series Tilt Level Switch Level Switch ATEX-Rated HR HY
- ATMI SOLIBA EX Series Tilt Level Switch Level Sensor ATEX-Rated Copolymer Polypropylene
- ATMI SOLIBA MLX Series Level Detector Level Sensor ATEX-Rated, Housing Aluminium
- ATMI SOLIBA PRP Series Level Detector Level Sensor ATEX-Rated, Housing Fibreglass Reinforced ABS
- ATMI SOLIBA PRP Series Level Detector Level Sensor ATEX-Rated, Housing Fibreglass Reinforced ABS
- ATMI SOLIBA MS Series Level Detector Level Sensor Zone-Rated, Housing ABS
- ATMI SOLIBA M Series Level Detector Level Sensor Housing Fibreglass Reinforced Plastic