Delta-Mobrey Gap Sensor Level Switch, Horizontal, Vertical, NO-Rated, Housing Polyphenylene Sulphide
- N° de stock RS:
- 204-6749
- Référence fabricant:
- 003S2
- Fabricant:
- Delta-Mobrey
Sous-total (1 unité)*
406,27 €
(TVA exclue)
491,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 20 unité(s) expédiée(s) à partir du 27 avril 2026
- Plus 105 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 406,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 204-6749
- Référence fabricant:
- 003S2
- Fabricant:
- Delta-Mobrey
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Delta-Mobrey | |
| Product Type | Level Switch | |
| Device Type | Gap Sensor | |
| Mount Type | Horizontal, Vertical | |
| Housing Material | Polyphenylene Sulphide | |
| Cable Length | 3m | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 70°C | |
| Maximum DC Voltage | 30V dc | |
| Maximum Current | 1A | |
| Maximum Pressure | 5bar | |
| Standards/Approvals | No | |
| Hazardous Area Certification | NO | |
| Sélectionner tout | ||
|---|---|---|
Marque Delta-Mobrey | ||
Product Type Level Switch | ||
Device Type Gap Sensor | ||
Mount Type Horizontal, Vertical | ||
Housing Material Polyphenylene Sulphide | ||
Cable Length 3m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 70°C | ||
Maximum DC Voltage 30V dc | ||
Maximum Current 1A | ||
Maximum Pressure 5bar | ||
Standards/Approvals No | ||
Hazardous Area Certification NO | ||
- Pays d'origine :
- GB



Mobrey Level Switch
The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give a voltage-free contact or solid-state transistor output for alarm signalling or as part of a pump control system. It is intended for level detection at a fixed point when liquid fills the gap between the crystals. The supply voltage ranges between 18VAC/DC and 30VAC/DC
Note:
If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.
Features and Benefits
Vessel pressure of 5bar (maximum)
Wet switching level detection at a fixed point when liquid fills the gap between the crystals
Switched voltage is 30VDC (maximum)
Suitable for low maintenance applications
High reliability with no moving parts
Not easily subject to fouling and not affected by ambient light conditions
Fitted with three metres of cable
Lightweight
No moving parts
Mounting types are horizontal and vertical
Applications
Low level alarms in header tanks
Pump control duty in feeder tanks
High and low alarms in storage tanks
Level and pump control in storage tanks
Small or thin wall tanks
Bund level detection
Steering gear oil
Certifications
NEMA 6P (10ft.)/IP66/IP68 (3m)
Liens connexes
- Delta-Mobrey Gap Sensor Level Switch Horizontal, Housing Polyphenylene Sulphide
- Delta-Mobrey
- RS PRO JC2M Series Ultrasonic Level Sensor Housing Polyphenylene Sulphide
- Sensata / Cynergy3 RSF70 Series Float Level Switch Housing Polyphenylene Sulphide
- Endress+Hauser FTC260 Series Point Level Level Sensor ATEX-Rated, Housing Polyphenylene Sulphide
- Endress+Hauser FTC262 Series Point Level Level Sensor ATEX-Rated, Housing Polyphenylene Sulphide
- SICK, Fibreglass Reinforced Polyphenylene Sulphide
- RS PRO LLF70 Series Float Float Switch Nitrile Rubber (NBR), Housing Polyphenylene Sulphide
