RS PRO RS PRO Series level sensor Level Sensor, Cable, Fluorelastomer, Housing 304 Stainless Steel
- N° de stock RS:
- 727-513
- Fabricant:
- RS PRO
Visuel non contractuel
Sous-total (1 unité)*
242,39 €
(TVA exclue)
293,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 242,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 727-513
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Device Type | level sensor | |
| Product Type | Level Sensor | |
| Mount Type | Cable | |
| Housing Material | 304 Stainless Steel | |
| Cable Length | 5m | |
| Minimum Operating Temperature | -10°C | |
| Interface Type | Cable | |
| Maximum Operating Temperature | 70°C | |
| Maximum DC Voltage | 32V | |
| Maximum Current | 20mA | |
| Maximum Pressure | 20bar | |
| Gasket Material | Fluorelastomer | |
| Standards/Approvals | UKCA | |
| Hazardous Area Certification | No | |
| Series | RS PRO | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Device Type level sensor | ||
Product Type Level Sensor | ||
Mount Type Cable | ||
Housing Material 304 Stainless Steel | ||
Cable Length 5m | ||
Minimum Operating Temperature -10°C | ||
Interface Type Cable | ||
Maximum Operating Temperature 70°C | ||
Maximum DC Voltage 32V | ||
Maximum Current 20mA | ||
Maximum Pressure 20bar | ||
Gasket Material Fluorelastomer | ||
Standards/Approvals UKCA | ||
Hazardous Area Certification No | ||
Series RS PRO | ||
- Pays d'origine :
- PL
The RS PRO Submersible level sensor is designed to measure liquid level based on the relationship between liquid column height and hydrostatic pressure. pressure is measured at the separating diaphragm of the immersed probe and referenced to atmospheric pressure through a capillary in the cable. a piezoresistive sensing element with an isolating diaphragm ensures accurate measurement, while integrated electronics standardize the signal and provide protection against overvoltage and induced interference.
Level transmitter
Submersible sensor
Piezoresistive stainless steel sensor
Accuracy 0.5% span according to EN IEC 62828 2
Suitable for water, rain water, oil, fuel oil, liquids, sludge media