Références fabricant

Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V-Rated Relay

N° de stock RS:: 240-9005
Référence fabricant:: MK9151.11 2-450kOhm DC24V
Fabricant:: Dold

Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V-Rated Relay

Sous-total (1 unité)*

173,11 €

(TVA exclue)

209,46 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

9 unité(s) prête(s) à être expédiée(s)

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	173,11 €

*Prix donné à titre indicatif

N° de stock RS:: 240-9005
Référence fabricant:: MK9151.11 2-450kOhm DC24V
Fabricant:: Dold

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Dold
	Product Type	Liquid Level Relay
	Number of Inputs	1
	Probe Voltage	10V ac
	Overall Length	82mm
	Mount Type	DIN Rail
	Response Time	20s
	Overall Depth	99 mm
	Minimum Operating Temperature	-20°C
	Terminal Type	Clamp
	Maximum Operating Temperature	60°C
	Maximum Supply Voltage	24V
	IP Rating	IP20
	Overall Width	22.5mm
	Standards/Approvals	CE
	Hazardous Area Certification	No
	Series	MK 9151N
	Input Type	Voltage
	Current Rating	4 A
	Number of Outputs	2
	Output Type	Relay

	Sélectionner tout
	Marque Dold
	Product Type Liquid Level Relay
	Number of Inputs 1
	Probe Voltage 10V ac
	Overall Length 82mm
	Mount Type DIN Rail
	Response Time 20s
	Overall Depth 99 mm
	Minimum Operating Temperature -20°C
	Terminal Type Clamp
	Maximum Operating Temperature 60°C
	Maximum Supply Voltage 24V
	IP Rating IP20
	Overall Width 22.5mm
	Standards/Approvals CE
	Hazardous Area Certification No
	Series MK 9151N
	Input Type Voltage
	Current Rating 4 A
	Number of Outputs 2
	Output Type Relay

Pays d'origine :: DE

MK 9151 - level relay

The MK9151 is used for

Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry running

Monitoring and control of the mix ratio for conductive liquids

General resistance monitoring, e.g. recording temperature limits with PTC (device to IEG 255, VDE 0435 section 303)

Features

3 electrode connections for 2-point and 1-point level control

The metering circuit galvanically isolated from the mains is immune from high levels of interference

Max. lead length to the electrodes: 1500 m

Wide setting range: 2 → 450 kΩ which enables differentiation between liquid and foam

Adjustable response and fallback delay: 0.2 → 20 s

Programmable for working current principle (without bridge) or rest current principle (X1-X2 and/or X1-COM bridge)

2 LEDs to indicate operating readiness and contact position

1 changer

Overall width 22.5 mm, protection class IP40

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels

Protection of pumps against dry running

Ability to detect liquid leaks in a system

Control of media mixing ratios

Control of liquid levels