ELT, 10 → 72V Output, 25W Output, 350mA Output, Constant Current
- N° de stock RS:
- 796-1943
- Référence fabricant:
- LC125/350-A
- Fabricant:
- ELT
Visuel non contractuel
Indisponible
RS n'aura plus ce produit en stock.
- N° de stock RS:
- 796-1943
- Référence fabricant:
- LC125/350-A
- Fabricant:
- ELT
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ELT | |
| Output Voltage | 10 → 72V | |
| Maximum Output Power | 25W | |
| Output Current | 350mA | |
| Input Voltage | 99 → 264 V | |
| Operation | Constant Current | |
| AC or DC Input Voltage | ac | |
| Voltage Rating | 99 → 264V | |
| Standards Met | EN-55015-3-2, EN-61000-3-2, EN-61000-3-3, EN-61347-2-13, EN-61547, EN-62384 | |
| Sélectionner tout | ||
|---|---|---|
Marque ELT | ||
Output Voltage 10 → 72V | ||
Maximum Output Power 25W | ||
Output Current 350mA | ||
Input Voltage 99 → 264 V | ||
Operation Constant Current | ||
AC or DC Input Voltage ac | ||
Voltage Rating 99 → 264V | ||
Standards Met EN-55015-3-2, EN-61000-3-2, EN-61000-3-3, EN-61347-2-13, EN-61547, EN-62384 | ||
- Pays d'origine :
- ES
ELT LED Drivers LC116 and LC125 Series
The LC 116 and LC 125 series by ELT is a range of constant current drivers for LED modules up to 16W and 25W.
Indoor use
Equipped with terminal cover and cable clamps
Clamping screws on primary and secondary circuits for cables with diameter: 3mm to 8mm
Maximum terminal section area 1.5 square mm. (secondary circuit)
Maximum length of secondary cables 5m
Suitable for installation on wooden surfaces
Standby ecological mode ˂0.4 W
High power factor
Thermal protection
Overload protection
Protection against no load operation
LED module dynamic protection
Equipped with terminal cover and cable clamps
Clamping screws on primary and secondary circuits for cables with diameter: 3mm to 8mm
Maximum terminal section area 1.5 square mm. (secondary circuit)
Maximum length of secondary cables 5m
Suitable for installation on wooden surfaces
Standby ecological mode ˂0.4 W
High power factor
Thermal protection
Overload protection
Protection against no load operation
LED module dynamic protection
Approvals
EN 61347-2-13
EN 62384
EN 61000-3-2
EN 61000-3-3
EN 55015
EN 61547
EN 62384
EN 61000-3-2
EN 61000-3-3
EN 55015
EN 61547
ELT LED Drivers / Power Supplies
Liens connexes
- ELT 16W Output Constant Current
- MEAN WELL LED Driver 25W Output Constant Current
- MEAN WELL LED Driver 25W Output Constant Current Dimmable
- ILS 16.8W Output Constant Current
- Recom 20W Output Constant Current
- Recom 20W Output Constant Current
- Friwo 13W Output Constant Current / Constant Voltage
- Roal Electronics 16.8W Output Constant Current
