Références fabricant

Recom LED Driver, 8/40 V dc Output, 28 W Output, 500 mA PWM

N° de stock RS:: 757-7276
Référence fabricant:: RBD-12-0.50/W
Fabricant:: Recom

Recom LED Driver, 8/40 V dc Output, 28 W Output, 500 mA PWM

Offre groupée disponible

Sous-total (1 unité)*

37,79 €

(TVA exclue)

45,73 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

Dernier stock RS

4 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution

Unité	Prix par unité
1 - 4	37,79 €
5 - 9	36,66 €
10 - 24	35,52 €
25 - 49	34,39 €
50 +	33,26 €

*Prix donné à titre indicatif

N° de stock RS:: 757-7276
Référence fabricant:: RBD-12-0.50/W
Fabricant:: Recom

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Recom
	Output Voltage	8/40 V dc
	Product Type	LED Driver
	Maximum Output Power	28W
	Input Voltage	36 V dc
	Mount Type	Through Hole
	Sub Type	LED Driver
	Dimming Operation	PWM
	Input Voltage Type	DC
	Terminal Type	Pin
	IP Rating	IP67
	LED Voltage	8/36 V
	Driver Current	500 mA
	Operating Modes	Constant Current
	Number of Outputs	1
	Standards/Approvals	RoHS Compliant
	Series	RBD-12
	Configuration	Enclosed
	Primary Type	DC-DC
	Power Dissipation	2.33W

	Sélectionner tout
	Marque Recom
	Output Voltage 8/40 V dc
	Product Type LED Driver
	Maximum Output Power 28W
	Input Voltage 36 V dc
	Mount Type Through Hole
	Sub Type LED Driver
	Dimming Operation PWM
	Input Voltage Type DC
	Terminal Type Pin
	IP Rating IP67
	LED Voltage 8/36 V
	Driver Current 500 mA
	Operating Modes Constant Current
	Number of Outputs 1
	Standards/Approvals RoHS Compliant
	Series RBD-12
	Configuration Enclosed
	Primary Type DC-DC
	Power Dissipation 2.33W

3-20W Constant Current Step Up Step Down LED Driver - RBD-12 Series

Pays d'origine :: TW

RECOM LED Driver, DC Input Type, 0 to 500mA Output current - RBD-12 Series - RBD-12-0.50/W

Take charge of your lighting with this LED driver from RECOM. By converting inputs between 8 and 36V DC into an 8 to 40V DC supply voltage, it's on hand to reliably power LEDs without overheating or the irritation of flickering. This keeps your bulbs performing at a high level, allowing them to shine on through. A mean time between failures of 1.7 million hours means this component can stay the distance.

• High efficiency of 90%, so it's an energy-saving device

• Digital and analogue dimming control options give you greater functionality

• Maximum operating humidity level of 95% RH for use in areas with high levels of water vapour

• Low weight of 17g to avoid putting strain on mounting surfaces

• Compact dimensions of 32.60 (L) x 16.65 (W) x 11.10mm for mounting in small areas

Applications

• Vehicle headlamps and taillights

• Hotels and restaurants

• Retail lighting systems

Can I use this unit in challenging conditions?

Yes, you can. This reliable LED driver is designed to power systems in a temperature range between -40°C and +75°C.

Recom LIGHTLINE 3-20W Constant Current Step Up Step Down LED Driver - RBD-12 Ser

LIGHTLINE RBD-12 series 3-20W constant current step up step down LED drivers. These RBD-12 series PCB mount constant current LED drivers have digital PWM and analogue dimming control and Vref output. Typical applications for these constant current LED drivers include solar powered lighting, traffic signalling and transportation lighting.

PCB through hole mount or wired versions

Digital PMW and analogue dimming

High efficiency of 90%

Short circuit protection and over temperature shutdown

8-40 Vdc output voltage

LED Drivers

Note

MTBF: MIL-HDBK217F at 25°C
Quoted temperature ranges are without derating

Standards

Meets EN-60950-1 and UL-60950-1