Références fabricant

Recom Step Down Constant Current Source, 56V Output, 67.2 W Output, 1200mA, 350 mA PWM

N° de stock RS:: 757-7254P
Référence fabricant:: RCD-48-1.20/M
Fabricant:: Recom

Recom Step Down Constant Current Source, 56V Output, 67.2 W Output, 1200mA, 350 mA PWM

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 757-7254P
Référence fabricant:: RCD-48-1.20/M
Fabricant:: Recom

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Recom
	Output Voltage	56V
	Product Type	LED Driver
	Maximum Output Power	67.2W
	Input Voltage	60V dc
	Mount Type	Through Hole
	Sub Type	Step Down Constant Current Source
	Dimming Operation	PWM
	Input Voltage Type	DC
	IP Rating	IP67
	LED Voltage	2, 56V
	Operating Modes	Constant Current
	Driver Current	1200, 350mA
	Number of Outputs	1
	Standards/Approvals	EN61000-4-5, EN55011, EN-50121-3-2, EN61000-4-2, EN61373, EN61000-4-3, EN61000-4-4, EN-60950-1, RoHS, EN61000-4-6, UL-60950-1
	Series	RCD-48
	Primary Type	DC-DC
	Power Dissipation	1.4W

	Sélectionner tout
	Marque Recom
	Output Voltage 56V
	Product Type LED Driver
	Maximum Output Power 67.2W
	Input Voltage 60V dc
	Mount Type Through Hole
	Sub Type Step Down Constant Current Source
	Dimming Operation PWM
	Input Voltage Type DC
	IP Rating IP67
	LED Voltage 2, 56V
	Operating Modes Constant Current
	Driver Current 1200, 350mA
	Number of Outputs 1
	Standards/Approvals EN61000-4-5, EN55011, EN-50121-3-2, EN61000-4-2, EN61373, EN61000-4-3, EN61000-4-4, EN-60950-1, RoHS, EN61000-4-6, UL-60950-1
	Series RCD-48
	Primary Type DC-DC
	Power Dissipation 1.4W

RCD-48-1.20/M Datasheet

Pays d'origine :: TW

RECOM LED Driver, 7 Pins, 60V DC Voltage Rating - RCD-48 Series - RCD-48-1.20/M

Take control of your lighting system with this LED driver from RECOM. It provides up to 39.2W of energy to an LED array, so it's Ideal for both general illumination and signalling. With its high efficiency of 96%, it conserves power and cuts troublesome heat build-up out of the equation. The unit also gives you the option of adjusting brightness in a flash, as it features both digital and analogue dimming controls.

Features & Benefits

• Input voltage range between 9 and 60V DC for wide compatibility

• DIP format for easy installation

• Constant current output provides reliably consistent lighting in high-power applications

• Functions reliably in an operating temperature range between -40°C and +80°C

• Compact dimensions of 32.6 (W) x 16 (H) x 11.2mm (D) to slot into a busy setup

Applications

• Automotive manufacturing

• Safety systems

• Offices and public buildings

What's the LED driver's case MADE out of?

It's MADE out of metal, which provides plenty of protection against impact and contamination to prolong the lifespan of the driver.

How do I install this product?

This is a through-hole mounting device, so you can fit it to the PCB by pushing its pins directly into corresponding holes.