STMicroelectronics LED Driver, 1mA, 1500 mA
- N° de stock RS:
- 188-9391P
- Référence fabricant:
- STCS1APHR
- Fabricant:
- STMicroelectronics
Sous-total 1 unité (conditionné en bande continue)*
2,00 €
(TVA exclue)
2,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 7 142 unité(s) expédiée(s) à partir du 25 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-9391P
- Référence fabricant:
- STCS1APHR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Display Driver | |
| Mount Type | Surface Mount | |
| Sub Type | LED Driver | |
| Terminal Type | Solder | |
| Input Voltage Type | DC | |
| Operating Modes | Constant Current | |
| Driver Current | 1, 1500mA | |
| LED Voltage | 40V | |
| Number of Outputs | 5 | |
| Standards/Approvals | RoHS | |
| Series | STCS1A | |
| Configuration | Vertical | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Display Driver | ||
Mount Type Surface Mount | ||
Sub Type LED Driver | ||
Terminal Type Solder | ||
Input Voltage Type DC | ||
Operating Modes Constant Current | ||
Driver Current 1, 1500mA | ||
LED Voltage 40V | ||
Number of Outputs 5 | ||
Standards/Approvals RoHS | ||
Series STCS1A | ||
Configuration Vertical | ||
The STCS1A is a BiCMOS constant current source designed to provide a precise constant current starting from a varying input voltage source. The main target is to replace discrete components solution for driving LEDs in low voltage applications such as 5 V, 12 V or 24 V giving benefits in terms of precision, integration and reliability.
The current is set with external resistor up to 1.5 A with a ± 10 % precision a dedicated pin allows implementing PWM dimming. An external capacitor allows setting the slope for the current rise from tens of microseconds to tens of milliseconds allowing reduction of EMI.
An open-drain pin output provides information on load disconnection condition.
Slope control with external cap
LED disconnection diagnostic
Up to 40 V input voltage
Up to 1.5 A output current
Less than 0.5 V voltage overhead
Shutdown pin
PWM dimming pin
Applications
LED constant current supplying for varying input voltages
Low voltage lighting
Small appliances LED lighting
Car LED lights