STMicroelectronics LED Driver, -0.5 to 20 V Output, 5 to 90 mA 0 to 100%
- N° de stock RS:
- 188-9227
- Référence fabricant:
- STP16CPC26PTR
- Fabricant:
- STMicroelectronics
Sous-total (1 bobine de 2500 unités)*
1 432,50 €
(TVA exclue)
1 732,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 5 000 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 0,573 € | 1 432,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-9227
- Référence fabricant:
- STP16CPC26PTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Display Driver | |
| Output Voltage | -0.5 to 20 V | |
| Input Voltage | 3 to 5.5 V | |
| Mount Type | Surface Mount | |
| Sub Type | LED Driver | |
| Dimming Operation | 0 to 100% | |
| Terminal Type | Solder | |
| Operating Modes | Constant Current | |
| Driver Current | 5 to 90 mA | |
| LED Voltage | 20 V | |
| Number of Outputs | 16 | |
| Standards/Approvals | RoHS | |
| Series | STP16CPC26 | |
| Primary Type | 16 Bit Constant current LED sink | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Display Driver | ||
Output Voltage -0.5 to 20 V | ||
Input Voltage 3 to 5.5 V | ||
Mount Type Surface Mount | ||
Sub Type LED Driver | ||
Dimming Operation 0 to 100% | ||
Terminal Type Solder | ||
Operating Modes Constant Current | ||
Driver Current 5 to 90 mA | ||
LED Voltage 20 V | ||
Number of Outputs 16 | ||
Standards/Approvals RoHS | ||
Series STP16CPC26 | ||
Primary Type 16 Bit Constant current LED sink | ||
The STP16CPC26 is a monolithic, low voltage, 16-bit constant current LED sink driver. The device contains a 16-bit shift register and data latches, which convert serial input data into parallel output format. In the output stage sixteen regulated current generators provide 5 mA to 90 mA constant current to drive LEDs. The current is externally adjusted through a resistor. LED brightness can be adjusted from 0% to 100% via OE pin.
The STP16CPC26 guarantees a 20 V driving capability, allowing users to connect more LEDs in series to each current source.
The high 30 MHz clock frequency makes the device suitable for high data rate transmission.
The thermal shutdown (170 °C with about 15 °C hysteresis) assures protection from overtemperature events.
The STP16CPC26 is housed in four different packages: QSOP24, SO-24, TSSOP-24 and HTSSOP-24 (with exposed pad).
16 constant current output channels
Adjustable output current through external resistor
Output current: 5 mA to 90 mA
±1% typical current accuracy bit to bit
Max clock frequency: 30 MHz
20 V current generators rated voltage
3 - 5.5 V power supply
Thermal shutdown for overtemperature protection