ROHM LED Driver IC, 3V, 48 V 150 mA 32-Pin VQFN-32
- N° de stock RS:
- 255-7688P
- Référence fabricant:
- BD82A26MUF-ME2
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 255-7688P
- Référence fabricant:
- BD82A26MUF-ME2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Output Current | 150mA | |
| Product Type | LED Driver IC | |
| Input Voltage | 3V, 48V | |
| Input Voltage Type | DC | |
| Dimming Operation | PWM | |
| Mount Type | Surface | |
| Package Type | VQFN-32 | |
| Number of Pins | 32 | |
| Maximum Output Voltage | 48V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 1mm | |
| Length | 5mm | |
| Standards/Approvals | RoHS | |
| Series | BD82A26MUF-M | |
| Width | 5mm | |
| Automotive Standard | AEC-Q100 | |
| Minimum Output Voltage | 3V | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Output Current 150mA | ||
Product Type LED Driver IC | ||
Input Voltage 3V, 48V | ||
Input Voltage Type DC | ||
Dimming Operation PWM | ||
Mount Type Surface | ||
Package Type VQFN-32 | ||
Number of Pins 32 | ||
Maximum Output Voltage 48V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 1mm | ||
Length 5mm | ||
Standards/Approvals RoHS | ||
Series BD82A26MUF-M | ||
Width 5mm | ||
Automotive Standard AEC-Q100 | ||
Minimum Output Voltage 3V | ||
The ROHM 6ch white LED driver built-in current driver boost DC/DC converter for automotive. This IC is a white LED driver for LCD backlight. It has 6ch current drivers for LED drive, making it ideal for high brightness LED drive. LED pin maximum voltage is 50 V, making it suitable for driving large LCD panels. The dimming is controlled by the PWM signal and can be set up to 20,000: 1@100 Hz. It also supports analog dimming, and can accommodate even higher brightness ranges by combining with PWM dimming. DC/DC converters can be controlled for boost applications, and the input operating voltage range is 3.0 V to 48 V.
Nano CapTM integrated(note 1)
AEC-Q100 qualified(note 2)
Functional safety supportive automotive products
Current driver for LED drive 6ch
Current mode boost DC/DC converters
Load switch (M1) control pin
PWM dimming (20,000: 1@100 Hz, 100 Hz to 25 kHz)
Sp