onsemi NCL30486B1DR2G LED Driver IC, -0.3 to 30 V 300 mA 9-Pin SOIC
- N° de stock RS:
- 248-5768
- Référence fabricant:
- NCL30486B1DR2G
- Fabricant:
- onsemi
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
6,10 €
(TVA exclue)
7,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 5 000 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 45 | 1,22 € | 6,10 € |
| 50 - 95 | 1,052 € | 5,26 € |
| 100 - 495 | 0,912 € | 4,56 € |
| 500 - 995 | 0,802 € | 4,01 € |
| 1000 + | 0,73 € | 3,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 248-5768
- Référence fabricant:
- NCL30486B1DR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | LED Driver IC | |
| Output Current | 300mA | |
| Input Voltage | -0.3 to 30 V | |
| Input Voltage Type | DC | |
| Dimming Operation | Analogue and Digital | |
| Mount Type | Through Hole | |
| Package Type | SOIC | |
| Number of Pins | 9 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Height | 1.75mm | |
| Series | NCL30486B | |
| Length | 5mm | |
| Width | 4 mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type LED Driver IC | ||
Output Current 300mA | ||
Input Voltage -0.3 to 30 V | ||
Input Voltage Type DC | ||
Dimming Operation Analogue and Digital | ||
Mount Type Through Hole | ||
Package Type SOIC | ||
Number of Pins 9 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Height 1.75mm | ||
Series NCL30486B | ||
Length 5mm | ||
Width 4 mm | ||
Automotive Standard No | ||
The ON Semiconductor Dimmable power factor corrected LED driver is a power factor corrected flyback controller targeting isolated constant current LED drivers, the controller
operates in a quasi−resonant mode to provide high efficiency, the device is high
High voltage start-up
Quasi−resonant peak current−mode control operation
Primary side feedback
CC / CV accurate control Vin up to 320 V rms
Tight LED Constant Current Regulation of ±2 percent typical
Digital power factor correction
Analog and digital dimm
Liens connexes
- onsemi LED Driver IC, -0.3 to 30 V 300 mA 9-Pin SOIC
- onsemi NCL30486B2DR2G LED Driver IC, -0.3 to 30 V 300 mA 9-Pin SOIC
- onsemi NCL30486A2DR2G LED Driver IC, -0.3 to 30 V 300 mA 9-Pin SOIC
- onsemi LED Driver IC, -0.3 to 30 V 8-Pin SOIC
- onsemi NCL30488B1DR2G LED Driver IC, -0.3 to 30 V 8-Pin SOIC
- onsemi NCL30488B4DR2G LED Driver IC, -0.3 to 30 V 8-Pin SOIC
- onsemi NCL30488B2DR2G LED Driver IC, -0.3 to 30 V 8-Pin SOIC
- DiodesZetex LED Driver IC, -0.3/30 V 8-Pin SOIC