ROHM BD18353EFV-ME2 LED Driver IC, 5/65 V 20-Pin HTSSOP-B
- N° de stock RS:
- 235-2565
- Référence fabricant:
- BD18353EFV-ME2
- Fabricant:
- ROHM
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
12,90 €
(TVA exclue)
15,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 06 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 45 | 2,58 € | 12,90 € |
| 50 - 95 | 2,218 € | 11,09 € |
| 100 - 245 | 1,886 € | 9,43 € |
| 250 - 995 | 1,764 € | 8,82 € |
| 1000 + | 1,28 € | 6,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 235-2565
- Référence fabricant:
- BD18353EFV-ME2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | LED Driver IC | |
| Input Voltage | 5/65 V | |
| Input Voltage Type | DC | |
| Dimming Operation | PWM, Analogue | |
| Mount Type | Through Hole | |
| Package Type | HTSSOP-B | |
| Number of Pins | 20 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 3 mm | |
| Height | 1mm | |
| Length | 3mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type LED Driver IC | ||
Input Voltage 5/65 V | ||
Input Voltage Type DC | ||
Dimming Operation PWM, Analogue | ||
Mount Type Through Hole | ||
Package Type HTSSOP-B | ||
Number of Pins 20 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 3 mm | ||
Height 1mm | ||
Length 3mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The ROHM 1-channel LED controller with high side current detection amplifier is built-in. PWM dimming duty can be freely set with built-in PWM generation circuit. PWM dimming realizes by driving an external P-channel MOSFET. Two systems of analogue dimming are built-in. High precision 3.0V output power supply for analogue dimming and PWM dimming setting is built-in.
AEC-Q100 qualified
Rail to rail current sense amplifier
PWM dimming signal generator
Over voltage protection
Short circuit protection
Spread spectrum frequency modulation
Liens connexes
- ROHM BD18353EFV-ME2 LED Driver IC, 5 → 65 V 20-Pin HTSSOP-B
- ROHM BD18397RUV-ME2 LED Driver IC, 65 V 3.2 A 48-Pin HTSSOP
- ROHM BD18398RUV-ME2 LED Driver IC, 65 V 4.8 A 48-Pin HTSSOP
- ROHM BD83A14EFV-ME2 LED Driver IC, 48 V 150 mA 24-Pin HTSSOP-B
- ROHM BD12801MUF-ME2 LED Driver IC, 3/5.5 V 130 mA 48-Pin HTSSOP-B
- ROHM BD83816EFV-ME2 LED Driver IC, 3/5.5 V 50 mA 24-Pin HTSSOP-B
- ROHM LED Driver IC, 65 V 4.8 A 48-Pin HTSSOP
- ROHM LED Driver IC, 65 V 3.2 A 48-Pin HTSSOP