Infineon ICL8810XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- N° de stock RS:
- 233-4360
- Référence fabricant:
- ICL8810XUMA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 paquet de 20 unités)*
9,06 €
(TVA exclue)
10,96 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 440 unité(s) expédiée(s) à partir du 24 mars 2026
- Plus 2 500 unité(s) expédiée(s) à partir du 02 avril 2026
- Plus 5 000 unité(s) expédiée(s) à partir du 21 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 20 - 80 | 0,453 € | 9,06 € |
| 100 - 180 | 0,43 € | 8,60 € |
| 200 - 480 | 0,412 € | 8,24 € |
| 500 - 980 | 0,394 € | 7,88 € |
| 1000 + | 0,367 € | 7,34 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-4360
- Référence fabricant:
- ICL8810XUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | LED Driver IC | |
| Output Current | 2mA | |
| Input Voltage | 8/24 V | |
| Input Voltage Type | AC/DC | |
| Dimming Operation | PWM | |
| Maximum Output Power | 125W | |
| Mount Type | Through Hole | |
| Package Type | PG-DSO-8 | |
| Number of Pins | 8 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.75mm | |
| Standards/Approvals | RoHS | |
| Series | ICL8810XU | |
| Width | 4 mm | |
| Length | 5mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type LED Driver IC | ||
Output Current 2mA | ||
Input Voltage 8/24 V | ||
Input Voltage Type AC/DC | ||
Dimming Operation PWM | ||
Maximum Output Power 125W | ||
Mount Type Through Hole | ||
Package Type PG-DSO-8 | ||
Number of Pins 8 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.75mm | ||
Standards/Approvals RoHS | ||
Series ICL8810XU | ||
Width 4 mm | ||
Length 5mm | ||
Automotive Standard No | ||
The Infineon ICL8810 is a voltage mode controller for flyback topologies operating in quasiresonant mode and valley switching DCM. It is designed for low and high power lumen LED driver, requiring high power factor and efficiency. The flyback controller is capable of controlling SSR-CV an PSR-CV topologies. Offering a wide usage in low cost applications where a PFC functionality in dual stage topologies is required. For lighting applications, the IC offers a wide power range as well as a comprehensive set of protections, including a power limitation. The IC is easy to design in and requires a minimum number of external components.
Soft-start to reduce stress during turn-on
External start-up circuit control signal with Vcc support in light load operation
Reduced gate driver output voltage during start-up sequence and burst mode allowing smaller Vcc cap
Burst mode for very light loads and low system standby power consumption
Liens connexes
- Infineon LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon ICL8820XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon ICL8800XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon LED Driver IC, 18 V 1.5 A 8-Pin PG-DSO-8
- Infineon LED Driver IC, 4.5/60 V 1.5 A 8-Pin PG-DSO-8
- Infineon ILD6150XUMA1 LED Driver IC, 4.5/60 V 1.5 A 8-Pin PG-DSO-8
- Infineon ILD8150EXUMA1 LED Driver IC, 18 V dc 1.5 A 8-Pin PG-DSO-8
- Infineon ILD8150XUMA1 LED Driver IC, 18 V dc 1.5 A 8-Pin PG-DSO-8