DiodesZetex AL8861QMP-13 LED Driver IC, 4.5/40 V 1.5 A 8-Pin MSOP
- N° de stock RS:
- 206-0174
- Référence fabricant:
- AL8861QMP-13
- Fabricant:
- DiodesZetex
Sous-total (1 paquet de 25 unités)*
10,05 €
(TVA exclue)
12,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 29 725 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 25 + | 0,402 € | 10,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 206-0174
- Référence fabricant:
- AL8861QMP-13
- Fabricant:
- DiodesZetex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | DiodesZetex | |
| Product Type | LED Driver IC | |
| Output Current | 1.5A | |
| Input Voltage Type | DC | |
| Dimming Operation | PWM | |
| Maximum Output Power | 1.2W | |
| Mount Type | Through Hole | |
| Package Type | MSOP | |
| Number of Pins | 8 | |
| Maximum Output Voltage | 42V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.1mm | |
| Length | 3mm | |
| Standards/Approvals | No | |
| Series | AL8861 | |
| Automotive Standard | AEC-Q100 | |
| Minimum Output Voltage | -0.3V | |
| Sélectionner tout | ||
|---|---|---|
Marque DiodesZetex | ||
Product Type LED Driver IC | ||
Output Current 1.5A | ||
Input Voltage Type DC | ||
Dimming Operation PWM | ||
Maximum Output Power 1.2W | ||
Mount Type Through Hole | ||
Package Type MSOP | ||
Number of Pins 8 | ||
Maximum Output Voltage 42V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 1.1mm | ||
Length 3mm | ||
Standards/Approvals No | ||
Series AL8861 | ||
Automotive Standard AEC-Q100 | ||
Minimum Output Voltage -0.3V | ||
- Pays d'origine :
- CN
The DiodesZetex high efficiency 40V automotive grade buck LED driver is a hysteresis mode DC/DC step-down LED driver, designed for driving single or multiple series of the connected LEDs efficiently from a voltage source higher than the LED voltage. It provide an externally adjustable output current up to 1.5A for MSOP 8EP package. It integrate the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.
Up to 1MHz switching frequency
LED short-circuit protection
Liens connexes
- DiodesZetex LED Driver IC, 4.5/40 V 1.5 A 8-Pin MSOP
- DiodesZetex AL8860QMP-13 LED Driver IC, 4.5/40 V 1.5 A 8-Pin MSOP
- DiodesZetex AL5814QMP-13 LED Driver IC, 4.5/60 V 18 mA 8-Pin MSOP
- DiodesZetex LED Driver IC, 4.5/60 V 18 mA 8-Pin MSOP
- DiodesZetex AL5812MP-13 LED Driver IC, 100 V 165 mA 8-Pin MSOP
- DiodesZetex LED Driver IC, 100 V 165 mA 8-Pin MSOP
- DiodesZetex AL8807MP-13 LED Driver IC, 6/36 V dc 1.3 A 8-Pin MSOP
- DiodesZetex LED Driver IC, 6/36 V dc 1.3 A 8-Pin MSOP