STMicroelectronics LED Driver ICLED Driver, -0.4V, 7 V 100 mA 16-Pin HTSSOP
- N° de stock RS:
- 203-3414P
- Référence fabricant:
- LED8102SXTTR
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 203-3414P
- Référence fabricant:
- LED8102SXTTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Output Current | 100mA | |
| Product Type | LED Driver ICLED Driver | |
| Input Voltage | -0.4V, 7V | |
| Input Voltage Type | DC | |
| Mount Type | Through Hole | |
| Package Type | HTSSOP | |
| Number of Pins | 16 | |
| Maximum Output Voltage | 7V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Width | 3mm | |
| Standards/Approvals | RoHS | |
| Series | LED8102SXTTR | |
| Height | 500μm | |
| Length | 3mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Output Current 100mA | ||
Product Type LED Driver ICLED Driver | ||
Input Voltage -0.4V, 7V | ||
Input Voltage Type DC | ||
Mount Type Through Hole | ||
Package Type HTSSOP | ||
Number of Pins 16 | ||
Maximum Output Voltage 7V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Width 3mm | ||
Standards/Approvals RoHS | ||
Series LED8102SXTTR | ||
Height 500μm | ||
Length 3mm | ||
Automotive Standard No | ||
The STMicroelectronics LED8102S is a monolithic, 8-channel LED driver with direct switch control. It is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). LEDs brightness can be adjusted with a global PWM signal applied to the output enable pin (OE), on all active outputs. The outputs can be connected in parallel, or left unconnected if not used, as required by application. Thermal protection switches OFF only the output channels.
Programmable current through external resistor
Thermal shutdown
Available in high thermal efficiency TSSOP exposed pad package