STMicroelectronics ALED8102SXTTR, ALED8102S LED Driver Development Module for HTSSOP16
- N° de stock RS:
- 240-7316P
- Référence fabricant:
- ALED8102SXTTR
- Fabricant:
- STMicroelectronics
Sous-total 2 unités (conditionné en bande continue)*
2,77 €
(TVA exclue)
3,352 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 484 unité(s) expédiée(s) à partir du 08 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 2 + | 1,385 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-7316P
- Référence fabricant:
- ALED8102SXTTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| LED Technology | LED Driver | |
| Kit Classification | Development Module | |
| Featured Device | HTSSOP16 | |
| Kit Name | ALED8102S | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
LED Technology LED Driver | ||
Kit Classification Development Module | ||
Featured Device HTSSOP16 | ||
Kit Name ALED8102S | ||
The STMicroelectronics monolithic, low voltage, 8 low-side channels LED driver. It guarantees up to 20 V output driving capability allowing users to connect several LEDs in series. In the output stage, 8 regulated current sources provide from 5 mA to 100 mA constant current to drive the LEDs. Current is programmed though a single external resistor. The ALED8102S is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). The thermal protection switches OFF the output channels only.
8 constant current output channels
Output enable input for global dimming
Output current: from 5 mA to 100 mA
Current programmable through external resistor
Thermal shutdown
Output enable input for global dimming
Output current: from 5 mA to 100 mA
Current programmable through external resistor
Thermal shutdown
