RS PRO 40 x 8 x 7mm Steel Feather Key
- N° de stock RS:
- 302-4223
- Fabricant:
- RS PRO
Sous-total (1 paquet de 10 unités)*
7,78 €
(TVA exclue)
9,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 510 unité(s) prête(s) à être expédiée(s)
- Plus 490 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 0,778 € | 7,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 302-4223
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Key Type | Feather | |
| Dimensions | 40 x 8 x 7mm | |
| Material | Steel | |
| Height | 7mm | |
| Length | 40mm | |
| Width | 8mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Key Type Feather | ||
Dimensions 40 x 8 x 7mm | ||
Material Steel | ||
Height 7mm | ||
Length 40mm | ||
Width 8mm | ||
- Pays d'origine :
- DE
RS PRO Steel Feather Key, 40 x 8 x 7 mm
Insert this RS PRO feather key into the keyway of a shaft to connect it to the gear hub of a machine. It allows the components to move in tandem without separating from one another.
This feather key is easy to install as it fits neatly into the recessed key slot, meaning there's no need to tighten screws to hold it in place. You don't have to worry about your machine parts unlocking from one another as the keyway's position along the machine shaft prevents the key from slipping out. You can count on this key to withstand the force of your rotational machinery thanks to its solid steel construction.
As part of the RS PRO range, this part has been engineer-tested for reliability and quality. It's often used on power transition equipment, such as gear drives, pulleys and sprockets.
This feather key is easy to install as it fits neatly into the recessed key slot, meaning there's no need to tighten screws to hold it in place. You don't have to worry about your machine parts unlocking from one another as the keyway's position along the machine shaft prevents the key from slipping out. You can count on this key to withstand the force of your rotational machinery thanks to its solid steel construction.
As part of the RS PRO range, this part has been engineer-tested for reliability and quality. It's often used on power transition equipment, such as gear drives, pulleys and sprockets.
Features and Benefits
- Dimensions of 40 x 8 x 7 mm
- Length of 40 mm
- Width of 8 mm
- Height of 7 mm
- Feather key type
- Steel material