Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 260A, 15 kW
- N° de stock RS:
- 805-5610
- Référence fabricant:
- 172866 P1-32/M4/SVB-SW
- Fabricant:
- Eaton
Visuel non contractuel
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 805-5610
- Référence fabricant:
- 172866 P1-32/M4/SVB-SW
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Product Type | Isolator Switch | |
| Number of Poles | 3 | |
| Mount Type | Panel Mount | |
| IP Rating | IP65 | |
| Handle Colour | Black | |
| Auxiliary Contacts Available | No | |
| Switching Current | 260A | |
| Series | P1-32 | |
| Terminal Type | Screw | |
| Switching AC Voltage | 230V ac | |
| Padlock Compatibility | No | |
| Switching DC Voltage | 60V dc | |
| Minimum Operating Temperature | -25°C | |
| Switching Power | 15kW | |
| Maximum Operating Temperature | -25°C | |
| Hazardous Area Certification | No | |
| Standards/Approvals | IEC, CSA, UL | |
| Length | 65mm | |
| Depth | 65mm | |
| Width | 460mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Product Type Isolator Switch | ||
Number of Poles 3 | ||
Mount Type Panel Mount | ||
IP Rating IP65 | ||
Handle Colour Black | ||
Auxiliary Contacts Available No | ||
Switching Current 260A | ||
Series P1-32 | ||
Terminal Type Screw | ||
Switching AC Voltage 230V ac | ||
Padlock Compatibility No | ||
Switching DC Voltage 60V dc | ||
Minimum Operating Temperature -25°C | ||
Switching Power 15kW | ||
Maximum Operating Temperature -25°C | ||
Hazardous Area Certification No | ||
Standards/Approvals IEC, CSA, UL | ||
Length 65mm | ||
Depth 65mm | ||
Width 460mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Eaton Isolator Switch, Non-Fused Type, 6000V AC Impulse Withstand Voltage - P1-32 Series - 172866 P1-32/M4/SVB-SW
Choose this 3-pole isolator switch from Eaton to manually deactivate part of an electrical system. It has a rating of 18.5kW and lets you power down potentially dangerous machinery to protect personnel from injury during routine servicing and maintenance. Switching off a defined section of your circuit limits costly downtime and allows for greater efficiency. Thanks to a maximum operating voltage of 690V AC, this unit is safe to use with powerful industrial systems. Switches like this one commonly serve as safety devices in automation and control networks.
Features & Benefits
• Wide operating temperature range between -25°C and +50°C for use in challenging environments
• IP65 protection indicates it's dustproof and resistant to low-pressure water jets from all directions
• Overvoltage category III rating to prevent injuries from voltage surges
• Panel mount type for quick and easy installation
Is this unit suitable for mounting in electrical cabinets?
Yes. This switch comes with an extension shaft that you can use to activate the stop function from a further distance. This feature lets you install the device in electrical cabinets that are up to 600mm deep.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 3-Pole Panel Mount Isolator Switch - 260A, 15 kW
- Eaton 3-Pole Panel Mount Isolator Switch - 260A, 18.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 260A, 15 kW
- Eaton 3-Pole Surface Isolator Switch - 260A, 15 kW
- Eaton 3-Pole Flush Isolator Switch -, IP65
- Eaton 4-Pole Flush Isolator Switch -, IP65
- Eaton 3-Pole Surface Isolator Switch - 260A, 18.5 kW
- Eaton 3-Pole Rear Isolator Switch - 32A, 15 kW
