Références fabricant

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 125A, 45 kW

N° de stock RS:: 621-7838
Référence fabricant:: 280897 P5-125/E
Fabricant:: Eaton

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 125A, 45 kW

Offre groupée disponible

Sous-total (1 unité)*

211,62 €

(TVA exclue)

256,06 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 2 unité(s) expédiée(s) à partir du 04 mai 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 - 4	211,62 €
5 - 11	205,15 €
12 +	198,51 €

*Prix donné à titre indicatif

N° de stock RS:: 621-7838
Référence fabricant:: 280897 P5-125/E
Fabricant:: Eaton

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Black
	Terminal Type	Screw
	Auxiliary Contacts Available	Yes
	Switching Current	125A
	Series	P5-125
	Switching AC Voltage	400V ac
	Padlock Compatibility	No
	Switching Power	45kW
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	50°C
	Hazardous Area Certification	ATEX
	Length	112mm
	Width	88mm
	Standards/Approvals	EN, CSA, ATEX, UL, IEC
	Depth	91mm

	Sélectionner tout
	Marque Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Black
	Terminal Type Screw
	Auxiliary Contacts Available Yes
	Switching Current 125A
	Series P5-125
	Switching AC Voltage 400V ac
	Padlock Compatibility No
	Switching Power 45kW
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 50°C
	Hazardous Area Certification ATEX
	Length 112mm
	Width 88mm
	Standards/Approvals EN, CSA, ATEX, UL, IEC
	Depth 91mm

Se connecter pour voir les modèles CAO

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rated uninterrupted current of up to 32 A

• Lockable in the 0/OFF position, with up to three padlocks

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller