Eaton 1-Pole Screw Isolator Switch -, IP65, 100A, 30 kW
- N° de stock RS:
- 431-6444
- Référence fabricant:
- 207275 T5-1-8200/I5/SVB
- Fabricant:
- Eaton
Bénéficiez d'une remise sur les achats en gros
Ajoutez 5 de plus pour économiser 38,20 €
Consulter les options de prix de grosSous-total (1 unité)*
249,11 €
(TVA exclue)
301,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 19 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 4 | 249,11 € | - |
| 5 - 11 | 241,47 € | 38,20 € |
| 12 + | 233,64 € | 185,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 431-6444
- Référence fabricant:
- 207275 T5-1-8200/I5/SVB
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Number of Poles | 1 | |
| Product Type | Isolator Switch | |
| Mount Type | Screw | |
| IP Rating | IP65 | |
| Electrical Phase | 1 | |
| Handle Colour | Red | |
| Auxiliary Contacts Available | Yes | |
| Switching Current | 100A | |
| Terminal Type | Screw | |
| Series | T51 | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 60V dc | |
| Padlock Compatibility | Yes | |
| Switching Power | 30kW | |
| Switching AC Voltage | 400V ac | |
| Maximum Operating Temperature | 50°C | |
| Depth | 125mm | |
| Length | 280mm | |
| Hazardous Area Certification | ATEX | |
| Width | 200mm | |
| Standards/Approvals | UL, IEC, EN, CSA, ATEX | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Number of Poles 1 | ||
Product Type Isolator Switch | ||
Mount Type Screw | ||
IP Rating IP65 | ||
Electrical Phase 1 | ||
Handle Colour Red | ||
Auxiliary Contacts Available Yes | ||
Switching Current 100A | ||
Terminal Type Screw | ||
Series T51 | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 60V dc | ||
Padlock Compatibility Yes | ||
Switching Power 30kW | ||
Switching AC Voltage 400V ac | ||
Maximum Operating Temperature 50°C | ||
Depth 125mm | ||
Length 280mm | ||
Hazardous Area Certification ATEX | ||
Width 200mm | ||
Standards/Approvals UL, IEC, EN, CSA, ATEX | ||
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Liens connexes
- Eaton Surface Mount Isolator Switch - 100A Maximum Current
- Surface Mount Isolator Switch - 100A Maximum Current
- Eaton 1-Pole Panel Mount Isolator Switch - 100A, 0.6 W
- Eaton 2-Pole Surface Mount Isolator Switch - 100A, 5.5 kW
- Eaton 6-Pole Surface Isolator Switch - 100A, 30 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 100A, 55 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 100A, 50 kW
- Eaton 6-Pole Surface Mount Isolator Switch - 760A, 30 kW