Allen Bradley 3-Pole Panel Mount Isolator Switch -, IP66, 40A, 18.5 kW

N° de stock RS:: 261-7571
Numéro d'article Distrelec:: 302-27-393
Référence fabricant:: 194E-E40-1753-6N
Fabricant:: Allen Bradley

Allen Bradley 3-Pole Panel Mount Isolator Switch -, IP66, 40A, 18.5 kW

Sous-total (1 unité)*

68,89 €

(TVA exclue)

83,36 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

5 unité(s) prête(s) à être expédiée(s)
Plus 35 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	68,89 €

*Prix donné à titre indicatif

N° de stock RS:: 261-7571
Numéro d'article Distrelec:: 302-27-393
Référence fabricant:: 194E-E40-1753-6N
Fabricant:: Allen Bradley

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Allen Bradley
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP66
	Electrical Phase	3
	Handle Colour	Black, Grey, Red, Yellow
	Terminal Type	Wire
	Switching Current	40A
	Series	194E
	Auxiliary Contacts Available	No
	Padlock Compatibility	Yes
	Minimum Operating Temperature	-25°C
	Switching Power	18.5kW
	Switching AC Voltage	440V ac
	Maximum Operating Temperature	60°C
	Width	54mm
	Depth	74mm
	Length	108mm
	Hazardous Area Certification	No
	Standards/Approvals	CE, CSA, UL

	Sélectionner tout
	Marque Allen Bradley
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP66
	Electrical Phase 3
	Handle Colour Black, Grey, Red, Yellow
	Terminal Type Wire
	Switching Current 40A
	Series 194E
	Auxiliary Contacts Available No
	Padlock Compatibility Yes
	Minimum Operating Temperature -25°C
	Switching Power 18.5kW
	Switching AC Voltage 440V ac
	Maximum Operating Temperature 60°C
	Width 54mm
	Depth 74mm
	Length 108mm
	Hazardous Area Certification No
	Standards/Approvals CE, CSA, UL

Statut RoHS : Exempté

Pays d'origine :: IT

Allen Bradley Panel Mount Non-Fused Isolator Switch, 3 Pole, 18.5kW - 194E-E40-1753-6N

This panel-mount non-fused isolator from Rockwell Automation's Allen Bradley range connects to your power distribution, load isolation and motor start/stop systems. Instead of a fuse, it uses the rotation of the rotary lever and locking ring to isolate the circuit. You can use this device while a circuit is still operating, so maintenance and checks can be carried out safely. Non-fused isolator switches are commonly used with circuit breakers and transmission lines, as well as transformers, industrial automation and control settings.

Features and Benefits

• IP65 (ingress protection) prevents interference caused by dust and low-pressure water jets

• Screw terminals on either side for easy installation

• Three spaces for padlocks to keep the switch secure

• IP20 finger-proof switch eliminates risk of electrocution

Standards and Certifications

• VDE (Verband der Elektrotechnik)

• IEC (International Electrotechnical Commission)

• UL (Underwriters' Laboratories)

• CSA (Canadian Standards Association)

Is this switch safe to use in high-temperature environments?

The switch is made from thermo-resistant materials to protect it from damage. To enhance the product’s safety, the materials are self-extinguishing if a fire does break out. A maximum operating temperature of +60°C ensures it the switch remains in working order even when exposed to extreme heat.

Switch Disconnectors (Front Mounting)

These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available.

Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos

Allen Bradley MCS Range

The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice. All switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat blade screwdriver. The switching category is AC23A.

Note

Refer to product description AC23A rating for Technical Specification differential. 3 pole versions supplied complete with handle.