ABB 3-Pole Surface Mount Switch Disconnector -, IP20, 25A
- N° de stock RS:
- 237-3339
- Référence fabricant:
- 2CMA142418R1000
- Fabricant:
- ABB
Sous-total (1 unité)*
54,94 €
(TVA exclue)
66,48 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 06 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 54,94 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 237-3339
- Référence fabricant:
- 2CMA142418R1000
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Number of Poles | 3 | |
| Product Type | Switch Disconnector | |
| Mount Type | Surface Mount | |
| IP Rating | IP20 | |
| Handle Colour | Grey | |
| Series | 2CMA | |
| Terminal Type | Screw Clamp | |
| Switching Current | 25A | |
| Switching AC Voltage | 690V ac | |
| Length | 130mm | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Number of Poles 3 | ||
Product Type Switch Disconnector | ||
Mount Type Surface Mount | ||
IP Rating IP20 | ||
Handle Colour Grey | ||
Series 2CMA | ||
Terminal Type Screw Clamp | ||
Switching Current 25A | ||
Switching AC Voltage 690V ac | ||
Length 130mm | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- BG
The ABB enclosure of the ABB's side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets (IP65), and hence built for outdoor and indoor use. The enclosure is available in different colours, grey, yellow and white. The cable entries are threaded and have knock out holes for 2 parallel cables, both from top and bottom. Membrane grommets are included (IP54). The handle is pad lockable and made for one padlock. The cover is interlocked. The switch is made for 5 wire system, and have a switchable neutral terminal and PE terminal. The terminals are easily accessible for easy installation
Cable Entry Position Up/Down
Cable Outlets Per Side 2xM25 / 2xM25
Degree of Protection acc. to IEC 60529 IP65
Impact Resistance Housing IK08 Rating
Enclosure Material Plastic
Liens connexes
- ABB 1-Pole Non-Fused Switch Disconnector - 25A, 0.4 W
- ABB 4-Pole Surface Mount Switch Disconnector -, IP20
- ABB 3-Pole Surface Mount Switch Disconnector -, IP20
- ABB 2-Pole Surface Isolator Switch - 25A, 75 kW
- ABB 3-Pole Surface Isolator Switch - 25A, 7.5 kW
- ABB 4-Pole Screw Switch Disconnector -, IP20
- ABB 3-Pole Screw Switch Disconnector - 0A
- ABB 4-Pole Screw IP20