Eaton 3-Pole Surface Mount Non-Fused Switch Disconnector -, IP65, 20A, 5.5 kW
- N° de stock RS:
- 220-7522
- Numéro d'article Distrelec:
- 135-11-891
- Référence fabricant:
- 207147 T0-2-1/I1/SVB
- Fabricant:
- Eaton
Sous-total (1 unité)*
50,60 €
(TVA exclue)
61,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 33 unité(s) prête(s) à être expédiée(s)
- Plus 157 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 50,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 220-7522
- Numéro d'article Distrelec:
- 135-11-891
- Référence fabricant:
- 207147 T0-2-1/I1/SVB
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Number of Poles | 3 | |
| Product Type | Non-Fused Switch Disconnector | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 3 | |
| Handle Colour | Black | |
| Switching Current | 20A | |
| Series | T0-2 | |
| Auxiliary Contacts Available | Yes | |
| Terminal Type | Screw | |
| Padlock Compatibility | Yes | |
| Switching Power | 5.5kW | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 690V ac | |
| Switching DC Voltage | 60V dc | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | IEC/EN 60947, VDE 0660, IEC/EN 60204 | |
| Hazardous Area Certification | No | |
| Length | 137mm | |
| Width | 80mm | |
| Depth | 120mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Number of Poles 3 | ||
Product Type Non-Fused Switch Disconnector | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 3 | ||
Handle Colour Black | ||
Switching Current 20A | ||
Series T0-2 | ||
Auxiliary Contacts Available Yes | ||
Terminal Type Screw | ||
Padlock Compatibility Yes | ||
Switching Power 5.5kW | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 690V ac | ||
Switching DC Voltage 60V dc | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals IEC/EN 60947, VDE 0660, IEC/EN 60204 | ||
Hazardous Area Certification No | ||
Length 137mm | ||
Width 80mm | ||
Depth 120mm | ||
Eaton Non-Fused Switch Disconnector, 3 Poles, 5.5kW Power Rating - T0-2 Series - 207147 T0-2-1/I1/SVB
Use this non-fused switch disconnector from Eaton to cut the current flowing to electrical equipment in the event of a short circuit or power outage. As the unit is non-fused, it's easy to reset after actuation because you don't need to replace any components. The IP65-rated housing is dust-tight and protected against close-range high-pressure jets of water. This means the switch is ideal for use in harsh industrial environments such as food production factories, warehouses and mechanical engineering plants.
Features & Benefits
• Screw connections for easy installation into your main circuit
• 1 million mechanical operations for a long service life
• Wide ambient temperature range of -25°C and +40°C for safe use in extreme environments
• High power rating of 5.5kW to handle demanding applications
What's the difference between a fused and a non-fused switch disconnector?
When it's actuated, a fused switch disconnector breaks the circuit using a fuse, which is a sacrificial element that needs to be replaced after tripping. Non-fused versions like this one stop the power supply using a rotary switch or knife-blade disconnect. Both options are reliable, so the one you choose will depend on your setup.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 3-Pole Surface Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 1-Pole Surface Mount Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 8-Pole Surface Mount Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 2-Pole Surface Mount Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 3-Pole Flush Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 2-Pole Rear Panel Non-Fused Isolator Switch - 5.5 kW
- Siemens 1-Pole Non-Fused Switch Disconnector - 20A
- Eaton 3-Pole Surface Mount Isolator Switch - 20A, 5.5 kW