Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 640A, 30 kW
- N° de stock RS:
- 103-8465
- Référence fabricant:
- 207348 P3-63/I4/SVB/HI11
- Fabricant:
- Eaton
Sous-total (1 unité)*
171,40 €
(TVA exclue)
207,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 27 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 15 unité(s) expédiée(s) à partir du 02 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 171,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 103-8465
- Référence fabricant:
- 207348 P3-63/I4/SVB/HI11
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Number of Poles | 3 | |
| Product Type | Isolator Switch | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 1, 3 | |
| Handle Colour | Red | |
| Auxiliary Contacts Available | Yes | |
| Switching Current | 640A | |
| Series | P3-63 | |
| Terminal Type | Screw | |
| Switching Power | 30kW | |
| Padlock Compatibility | No | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 230V ac | |
| Switching DC Voltage | 60V dc | |
| Maximum Operating Temperature | 50°C | |
| Width | 124mm | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | CSA, IEC, UL | |
| Length | 160mm | |
| Depth | 240mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Number of Poles 3 | ||
Product Type Isolator Switch | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 1, 3 | ||
Handle Colour Red | ||
Auxiliary Contacts Available Yes | ||
Switching Current 640A | ||
Series P3-63 | ||
Terminal Type Screw | ||
Switching Power 30kW | ||
Padlock Compatibility No | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 230V ac | ||
Switching DC Voltage 60V dc | ||
Maximum Operating Temperature 50°C | ||
Width 124mm | ||
Hazardous Area Certification NO | ||
Standards/Approvals CSA, IEC, UL | ||
Length 160mm | ||
Depth 240mm | ||
Eaton Isolator Switch, Lockable, 3NO Normal State Configuration - 207348 P3-63/I4/SVB/HI11
To safely shut down a circuit in a jiffy, reach for this high-power isolator switch from Eaton. You can use it to disconnect sections of a circuit carrying currents up to 63A, voltages up to 690V AC and power up to 37kW. This lets you carry out necessary maintenance or identify faults safely. As a 3-pole, single-throw switch, it's suitable for switching either single-phase systems or the 3-phase systems commonly used in industrial settings. This makes it a good bet for factory floors and workshops.
• Red handle makes it easy to spot in an emergency
• Can be padlocked so no one can turn the power back on until you're ready
• Operating temperature range of -25°C to +50°C indicates it's suitable for use in harsh industrial environments
• IP65 rating means it's dust-tight and stands up to low-pressure water sprays
• Screw terminals help you quickly make secure electrical connections
What's a 3-phase system?
3-phase power uses a 3-wire AC power circuit that has each phase signal set 120 electrical degrees apart. This delivers power more efficiently and consistently than a single-phase system and is commonly used in demanding industrial settings.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 3-Pole Surface Isolator Switch - 640 A, 5.5 kW
- Eaton 3-Pole Panel Mount Isolator Switch - 640 A, 30 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 30 kW
- Eaton 3+N-Pole Surface Isolator Switch -, IP65
- Eaton 3-Pole Surface Mount Isolator Switch - 63 A, 30 kW
- Eaton 3-Pole Surface Non-Fused Isolator Switch - 63 A, 30 kW
- Eaton 3-Pole Surface Isolator Switch - 640 A, 4.5 W
- Eaton 3-Pole Surface Mount Isolator Switch - 640 A, 4.5 W