Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- N° de stock RS:
- 922-5655
- Référence fabricant:
- HCPL-7800-300E
- Fabricant:
- Broadcom
Offre groupée disponible
Sous-total (1 tube de 50 unités)*
318,90 €
(TVA exclue)
385,85 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 150 unité(s) expédiée(s) à partir du 02 mars 2026
- Plus 550 unité(s) expédiée(s) à partir du 27 mai 2026
- Plus 550 unité(s) expédiée(s) à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 50 - 200 | 6,378 € | 318,90 € |
| 250 - 450 | 5,856 € | 292,80 € |
| 500 + | 5,71 € | 285,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 922-5655
- Référence fabricant:
- HCPL-7800-300E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 4.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole, Surface | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Isolation Voltage | 3750Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Length | 9.8mm | |
| Series | HCPL-7800 | |
| Standards/Approvals | IEC/EN/DIN EN 60747-5-2, CSA, UL 1577 | |
| Height | 1.78mm | |
| Width | 7.62 mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 4.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole, Surface | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Isolation Voltage 3750Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Vos - Input Offset Voltage 0.3 mV | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Length 9.8mm | ||
Series HCPL-7800 | ||
Standards/Approvals IEC/EN/DIN EN 60747-5-2, CSA, UL 1577 | ||
Height 1.78mm | ||
Width 7.62 mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Liens connexes
- HCPL-7800-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7840-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7800A-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7510-300E Broadcom 4.5 → 5.5 V, 8-Pin PDIP
- HCPL-7800A-000E Broadcom 5 V, 8-Pin PDIP
- ACPL-7900-300E Broadcom 3 → 5.5 V, 8-Pin PDIP
- Broadcom Through Hole, 8-Pin PDIP
- HCPL-788J-000E Broadcom 16-Pin SOIC