Broadcom Isolation Amplifier, 8-Pin 6V SOIC
- N° de stock RS:
- 910-8229P
- Référence fabricant:
- ACNT-H79A-000E
- Fabricant:
- Broadcom
Sous-total 1 unité (conditionné en tube)*
9,46 €
(TVA exclue)
11,45 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 473 unité(s) expédiée(s) à partir du 22 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 9,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 910-8229P
- Référence fabricant:
- ACNT-H79A-000E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 6V | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Vos - Input Offset Voltage | -2 to 2 mV | |
| Isolation Type | Optical | |
| Isolation Voltage | 7500Vrms | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Height | 3.4mm | |
| Standards/Approvals | IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | |
| Length | 13.6mm | |
| Series | ACNT-H79 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 6V | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Vos - Input Offset Voltage -2 to 2 mV | ||
Isolation Type Optical | ||
Isolation Voltage 7500Vrms | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Height 3.4mm | ||
Standards/Approvals IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | ||
Length 13.6mm | ||
Series ACNT-H79 | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers