Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V SOIC
- N° de stock RS:
- 734-4931P
- Référence fabricant:
- ACPL-C790-000E
- Fabricant:
- Broadcom
Offre groupée disponible
Sous-total 16 unités (conditionné en tube)*
89,60 €
(TVA exclue)
108,48 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 474 unité(s) expédiée(s) à partir du 23 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 16 - 39 | 5,60 € |
| 40 + | 5,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 734-4931P
- Référence fabricant:
- ACPL-C790-000E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 3V | |
| Number of Channels | 1 | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 2 mV | |
| Minimum Operating Temperature | 105°C | |
| Isolation Type | Precision Miniature Isolation Amplifiers | |
| Maximum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Series | ACPL-C790 | |
| Width | 6.81 mm | |
| Length | 5.85mm | |
| Height | 3.18mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 3V | ||
Number of Channels 1 | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 2 mV | ||
Minimum Operating Temperature 105°C | ||
Isolation Type Precision Miniature Isolation Amplifiers | ||
Maximum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Series ACPL-C790 | ||
Width 6.81 mm | ||
Length 5.85mm | ||
Height 3.18mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Liens connexes
- ACPL-C790-000E Broadcom 3 → 5.5 V, 8-Pin SOIC
- ACPL-C87BT-000E Broadcom 3 → 5.5 V, 8-Pin SOIC
- ACPL-C87AT-000E Broadcom 3 → 5.5 V, 8-Pin SOIC
- ACPL-782T-000E Broadcom, Isolation Amplifier
- ACPL-C780-000E Broadcom 5 V, 8-Pin SOIC
- ACPL-C78A-000E Broadcom 5 V, 8-Pin SOIC
- ACPL-790A-000E Broadcom 3 → 5.5 V, 8-Pin PDIP
- ACPL-790B-000E Broadcom 3 → 5.5 V, 8-Pin PDIP