ACPL-782T-300E Broadcom, Isolation Amplifier, 4.5 To 5.5 V, 8-Pin DIP8 - Gull Wing
- N° de stock RS:
- 178-3173
- Référence fabricant:
- ACPL-782T-300E
- Fabricant:
- Broadcom
Offre groupée disponible
Sous-total (1 tube de 50 unités)*
353,50 €
(TVA exclue)
427,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 600 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 50 - 50 | 7,07 € | 353,50 € |
| 100 - 100 | 6,412 € | 320,60 € |
| 150 - 150 | 6,248 € | 312,40 € |
| 200 + | 6,092 € | 304,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-3173
- Référence fabricant:
- ACPL-782T-300E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Power Supply Type | Single | |
| Typical Dual Supply Voltage | 4.5 To 5.5V | |
| Typical Single Supply Voltage | 4.5 To 5.5 V | |
| Isolation Mode Rejection | 76dB | |
| Rail to Rail | Rail to Rail Output | |
| Number of Channels per Chip | 1 | |
| Mounting Type | Surface Mount | |
| Package Type | DIP8 - Gull Wing | |
| Pin Count | 8 | |
| Height | 4.7mm | |
| Width | 6.35mm | |
| Length | 9.8mm | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | 125 °C | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Power Supply Type Single | ||
Typical Dual Supply Voltage 4.5 To 5.5V | ||
Typical Single Supply Voltage 4.5 To 5.5 V | ||
Isolation Mode Rejection 76dB | ||
Rail to Rail Rail to Rail Output | ||
Number of Channels per Chip 1 | ||
Mounting Type Surface Mount | ||
Package Type DIP8 - Gull Wing | ||
Pin Count 8 | ||
Height 4.7mm | ||
Width 6.35mm | ||
Length 9.8mm | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature 125 °C | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Liens connexes
- ACPL-782T-300E Broadcom
- ACPL-782T-000E Broadcom, Isolation Amplifier
- HCPL-7800A-500E Broadcom Maximum of 5.5 V, 8-Pin DIP8 - Gull Wing
- ACPL-782T-000E Broadcom 4.5 → 5.5 V, 8-Pin DIP
- ACPL-7900-300E Broadcom 3 → 5.5 V, 8-Pin PDIP
- ACPL-C79A-500E Broadcom, Isolation Amplifier
- ACPL-C79A-500E Broadcom, Isolation Amplifier SO
- HCPL-7510-300E Broadcom 4.5 → 5.5 V, 8-Pin PDIP