Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- N° de stock RS:
- 451-007P
- Référence fabricant:
- HCPL-7800A-000E
- Fabricant:
- Broadcom
Offre groupée disponible
Sous-total 10 unités (conditionné en tube)*
124,60 €
(TVA exclue)
150,80 €
(TVA incluse)
Ajouter 10 unités pour bénéficier d'une livraison gratuite
En stock
- Plus 172 unité(s) expédiée(s) à partir du 23 février 2026
- Plus 450 unité(s) expédiée(s) à partir du 27 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 24 | 12,46 € |
| 25 + | 11,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 451-007P
- Référence fabricant:
- HCPL-7800A-000E
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Surface, Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Minimum Operating Temperature | -40°C | |
| Isolation Voltage | 3750Vrms | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | UL 1577, IEC/EN/DIN EN 60747-5-2, CSA | |
| Width | 7.62 mm | |
| Length | 9.8mm | |
| Series | HCPL-7800A | |
| Height | 1.78mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Surface, Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Minimum Operating Temperature -40°C | ||
Isolation Voltage 3750Vrms | ||
Vos - Input Offset Voltage 0.3 mV | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals UL 1577, IEC/EN/DIN EN 60747-5-2, CSA | ||
Width 7.62 mm | ||
Length 9.8mm | ||
Series HCPL-7800A | ||
Height 1.78mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Liens connexes
- HCPL-7800A-000E Broadcom 5 V, 8-Pin PDIP
- HCPL-7800A-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7800A-500E Broadcom Maximum of 5.5 V, 8-Pin DIP
- HCPL-7800A-500E Broadcom Maximum of 5.5 V, 8-Pin DIP8 - Gull Wing
- HCPL-788J-000E Broadcom 16-Pin SOIC
- HCPL-7840-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7800-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7510-300E Broadcom 4.5 → 5.5 V, 8-Pin PDIP