Unité

sélectionner ou taper la quantité

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Watson Smith
	Product Type	IP Converter
	Input Signal	4 to 20 mA
	Maximum Flow Rate	300NL/min
	Connection Size	NPT 1/4 Female
	Connection Thread Standard	NPT
	Minimum Outlet Pressure	0.2bar
	Maximum Input Pressure	5bar
	Maximum Outlet Pressure	1bar
	IP Rating	IP65
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Hazardous Area Certification	Ex ia IIC T4 Ga, SIRA 04 ATEX 2301 X, EN60079, ATEX
	Standards/Approvals	CENELEC ATEX, EN60079, SIRA, Sira 02ATEX2002X

	Sélectionner tout
	Marque Watson Smith
	Product Type IP Converter
	Input Signal 4 to 20 mA
	Maximum Flow Rate 300NL/min
	Connection Size NPT 1/4 Female
	Connection Thread Standard NPT
	Minimum Outlet Pressure 0.2bar
	Maximum Input Pressure 5bar
	Maximum Outlet Pressure 1bar
	IP Rating IP65
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Hazardous Area Certification Ex ia IIC T4 Ga, SIRA 04 ATEX 2301 X, EN60079, ATEX
	Standards/Approvals CENELEC ATEX, EN60079, SIRA, Sira 02ATEX2002X

Statut RoHS : Exempté

Pays d'origine :: GB

Standard Converters

These standard converters are reliable pneumatic fittings. This range has a 1/4 inch female port and includes mounting bracket and connector plug. There is minimal vibration from this converter and it also has the benefit of being sensitive to low pressures. Proportional converters have a glass reinforced nylon cover and nitrile diaphragms. This range of pneumatic pressure control proportional converters provide excellent pressure control providing oil free, dry air filtered to 5μm.

Integral volume booster gives flow rates up to 4·72 dm³/s, 10scfm

Response time typically 2 seconds (10-90%)

Low supply pressure sensitivity

1/4 inch female port connection

Supplied with DIN43650 connector plug

I/P & E/P Converters

I/P converters are electro-pneumatic instruments that will change pneumatic pressures in response to varying electrical current and voltage input signals. They have extensive application potential in both industrial and process systems, for control of cylinders, valves, valve positioners, relays, brakes and clutches. The converters can be mounted in control rooms or in the field, and have zero and span settings that are adjustable from the front face of the instrument. Failsafe converters are available which will cause the output pressure to fall to <15mbar (0.2 psig) in the event of power failure or loss of input signal.

Note

*Inlet pressure must be at least 0.7 bar above output pressure

Watson Smith NPT 1/4 Female 300 NL/min IP Converter, 4 to 20 mA input 0.2 bar to 1 bar

Frais de livraison offerts pour toute commande de plus de 75,00 €

Standard Converters

I/P & E/P Converters

Note

Liens connexes