Microchip 8-Channel I/O Expander SPI 20-Pin SSOP, MCP23S08T-E/SS
- N° de stock RS:
- 177-3372
- Référence fabricant:
- MCP23S08T-E/SS
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total (1 paquet de 10 unités)*
13,56 €
(TVA exclue)
16,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 310 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 20 | 1,356 € | 13,56 € |
| 30 + | 1,322 € | 13,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3372
- Référence fabricant:
- MCP23S08T-E/SS
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Number of I/O Channels | 8 | |
| Interface | SPI | |
| Number of Pins | 20 | |
| Package Type | SSOP | |
| Clock Frequency | 10MHz | |
| Mounting Type | Surface Mount | |
| Maximum Supply Voltage | 5.5 V | |
| Minimum Supply Voltage | 1.8 V | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Number of I/O Channels 8 | ||
Interface SPI | ||
Number of Pins 20 | ||
Package Type SSOP | ||
Clock Frequency 10MHz | ||
Mounting Type Surface Mount | ||
Maximum Supply Voltage 5.5 V | ||
Minimum Supply Voltage 1.8 V | ||
- Pays d'origine :
- US
The MCP23X08 device provides 8-bit, general purpose, parallel I/O expansion for I2C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface:MCP23008 – I2C interface, three address pins
MCP23S08 – SPI interface, two address pinsThe MCP23X08 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.
MCP23S08 – SPI interface, two address pinsThe MCP23X08 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.
8-bit port expander with interrupt output
2 address inputs for up to 4 devices on one bus
25mA sink/source capability per I/O
Supports up to 10MHz SPI™ clock speeds
Internal power-on-reset (POR)
2 address inputs for up to 4 devices on one bus
25mA sink/source capability per I/O
Supports up to 10MHz SPI™ clock speeds
Internal power-on-reset (POR)
Liens connexes
- Microchip 8-Channel I/O Expander SPI 20-Pin SSOP, MCP23S08T-E/SS
- Microchip I/O Expander SPI 28-Pin SSOP, MCP23S17T-E/SS
- Microchip I/O Expander SPI 18-Pin QFN, MCP23S08T-E/ML
- Microchip 8-Channel I/O Expander SPI 20-Pin SSOP, MCP23S08-E/SS
- Microchip 8-Channel I/O Expander SPI 18-Pin SOIC, MCP23S08T-E/SO
- Microchip 16-Channel I/O Expander Serial-SPI 28-Pin SSOP, MCP23S17-E/SS
- Microchip 19-Channel I/O Expander Serial-SPI 28-Pin SSOP, MTCH652-I/SS
- Microchip I/O Expander I2C 24-Pin SSOP, MCP23018T-E/SS
