Références fabricant

Microchip 16-Channel I/O Expander SPI QFN 28, MCP23S17T-E/ML

N° de stock RS:: 177-3082
Numéro d'article Distrelec:: 304-38-534
Référence fabricant:: MCP23S17T-E/ML
Fabricant:: Microchip

Microchip 16-Channel I/O Expander SPI QFN 28, MCP23S17T-E/ML

Sous-total (1 paquet de 5 unités)*

7,73 €

(TVA exclue)

9,355 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité	le paquet*
5 +	1,546 €	7,73 €

*Prix donné à titre indicatif

N° de stock RS:: 177-3082
Numéro d'article Distrelec:: 304-38-534
Référence fabricant:: MCP23S17T-E/ML
Fabricant:: Microchip

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Microchip
	Product Type	I/O Expander
	Number of I/O Channels	16
	Package Type	QFN
	Clock Frequency	10MHz
	Mount Type	Surface
	Interface Type	SPI
	Maximum Supply Voltage	5.5V
	Minimum Supply Voltage	1.8V
	Pin Count	28
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Length	6mm
	Width	6 mm
	Standards/Approvals	No
	Height	1mm
	Series	MCP23S17
	Automotive Standard	No

	Sélectionner tout
	Marque Microchip
	Product Type I/O Expander
	Number of I/O Channels 16
	Package Type QFN
	Clock Frequency 10MHz
	Mount Type Surface
	Interface Type SPI
	Maximum Supply Voltage 5.5V
	Minimum Supply Voltage 1.8V
	Pin Count 28
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Length 6mm
	Width 6 mm
	Standards/Approvals No
	Height 1mm
	Series MCP23S17
	Automotive Standard No

Datasheet

The MCP23017/MCP23S17 (MCP23X17) device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface.MCP23017 – I2C interface MCP23S17 – SPI interface

The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits (IODIRA/B). The data for each input or output is kept in the corresponding input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

16-bit input/output port expander with interrupt output

Cascadable for up to 8 devices on one bus

25mA sink/source capability per I/O

Supports up to 10MHz SPI™ clock speeds

Microchip 16-Channel I/O Expander SPI QFN 28, MCP23S17T-E/ML

Liens connexes