Phoenix Contact 4-Contact Male Interface Module, RJ45 Connector, DIN Rail, 1A
- N° de stock RS:
- 528-0497
- Référence fabricant:
- 2744610
- Fabricant:
- Phoenix Contact
Sous-total (1 unité)*
69,66 €
(TVA exclue)
84,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
- Plus 18 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 72 unité(s) expédiée(s) à partir du 11 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 69,66 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 528-0497
- Référence fabricant:
- 2744610
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Interface Module | |
| Gender | Male | |
| Wire Size | 26 to 16 AWG | |
| Current | 1A | |
| Number of Contacts | 4 | |
| Orientation | Vertical | |
| Connector Type | RJ45 | |
| Mount Type | DIN Rail | |
| Voltage | 1 V | |
| Cable CSA | 0.14 to 1.5 mm² | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Depth | 52mm | |
| Width | 25 mm | |
| Length | 90mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Interface Module | ||
Gender Male | ||
Wire Size 26 to 16 AWG | ||
Current 1A | ||
Number of Contacts 4 | ||
Orientation Vertical | ||
Connector Type RJ45 | ||
Mount Type DIN Rail | ||
Voltage 1 V | ||
Cable CSA 0.14 to 1.5 mm² | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
Depth 52mm | ||
Width 25 mm | ||
Length 90mm | ||
- Pays d'origine :
- US
Phoenix Contact 4 Pole Interface Module, DIN Rail Mount - FL CAT5 TERMINAL BOX - 2744610
This Phoenix Contact interface module lets you join two separate ethernet cables to each other, without the need for couplers or connectors. It has a simple screw termination and an RJ45 (Registered Jack) socket.
The component is designed to be mounted on a DIN rail with a simple clip action that makes it quick to remove or replace. To ensure your safety, it has shielding that you can connect to the DIN rail with a simple locking foot. It's also made from a durable green polyamide (PA) material that offers good electrical and chemical resistance. An IP20 rating means this product is touch-proof and resistant to large particles.
As part of an ethernet connection, the module can support speeds of up to 100 Mbps. Use it as part of your computer hardware or in network setups at home and in commercial environments.
• Dimensions of 90 (length) x 25 (width) x 52 mm (depth)
• Minimum operating temperature of 0°C
• Maximum operating temperature of +70°C
• Four contacts
• Conductor size of 26 to 16 American Wire Gauge (AWG)
• Weight of 68.2 g
FL CAT5 Terminal box - Ethernet connection field
CAT5 Ethernet connection field
Fast assembly, since no need to make up RJ45 connectors in-situ
Stamped screw terminals
Strain relief with shield connection
Shielding connected to DIN rail via universal locking foot
Liens connexes
- Phoenix Contact 4-Contact Interface Module 30A
- Phoenix Contact Interface Module, DIN Rail Mount
- Phoenix Contact 14-Contact Interface Module 32A
- Phoenix Contact 10-Contact Interface Module 32A
- Phoenix Contact SOCKET Series Interface Module, DIN Rail Mount
- Phoenix Contact VARIOFACE Series 4-Contact Female Interface Module DIN Rail Mount, 200mA
- Phoenix Contact BASE-MSTB Series 4-Contact Interface Module DIN Rail Mount, 15A
- MEAN WELL 4-Contact Interface Module, DIN Rail Mount