Phoenix Contact Fibre Optic Converter
- N° de stock RS:
- 801-9156
- Numéro d'article Distrelec:
- 110-87-379
- Référence fabricant:
- 2902854
- Fabricant:
- Phoenix Contact
Sous-total (1 unité)*
400,55 €
(TVA exclue)
484,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 5 unité(s) expédiée(s) à partir du 29 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 400,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 801-9156
- Numéro d'article Distrelec:
- 110-87-379
- Référence fabricant:
- 2902854
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Fibre Optic Converter | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 65°C | |
| Width | 99mm | |
| Standards/Approvals | No | |
| Height | 99mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Fibre Optic Converter | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 65°C | ||
Width 99mm | ||
Standards/Approvals No | ||
Height 99mm | ||
- Pays d'origine :
- DE
Phoenix Contact Fibre-Optic Converter, 18 to 30V DC Supply Voltage, 24 to 14AWG - FL MC EF 1300 MM ST - 2902854
Use this fibre-optic converter from Phoenix Contact to increase the reach of your data transmission network. By converting electrical signals from copper-based connections to efficient fibre-optic signals, it updates your network without the need to replace your existing wiring. Signals are reliably transmitted across a substantial distance of up to 10km for use in large-scale applications. Thanks to a Rapid transfer rate of 10 to 100Mbps, this unit ensures high-speed transmission for improved productivity in your workplace.
The converter has a low latency of ±1.3 microseconds to ensure minimal lag. It consumes less than 100mA of current during operation, so it's energy-efficient. As the housing is MADE of a Durable PA 66 material that's flame-retardant and resistant to impact, this is a safe option for use in demanding environments.
• ATEX certified for use in potentially explosive environments
• IP20 (ingress protection) rating means it's finger-safe and protected against objects larger than 12mm in size
• Wide operating temperature range of -40°C to +65°C for use in demanding environments