Fluke 568EX Infrared Thermometer, -40°C Min, ±1 % Accuracy, °C and °F Measurements With RS Calibration

Designed for dangerous and hazardous settings, this laser thermometer is safe for use in Class I, DIV 1, DIV 2 or Zone 1 and 2 environments. Fluke's 568 Ex is non-contact, therefore ideal for most Ex rated areas and meets intrinsically safe certifications in the above classes from recognised safety agencies.

Soft key menu features and a straight forward user interface make complex testing and measurement easy. Navigation is made simple and emissivity can be adjusted, save data or turn alarms on and off by just a few pushes of a button. Measure from a greater distance with the 50:1 distance to spot ratio on a wide variety of surfaces, additionally using the built in material table. This thermometer also features two levels of brightness on the large backlit display, making it usable even in those darker environments.

• -40 °C to +800 °C (-40 °F to +1472 °F) temperature range
• Conductive carrying case
• 50:1 distance to spot
• Capture up to 99 points of data
• 5 languages to choose from
• ± 1 % measurement accuracy

Zone 1 and 2, IECEx EPS 13.0006X, Ex ia IIC T4 Gb, 0 °C ≤ Ta ≤ 50 °C, EPS 13 ATEX 1.525 X, II 2G Ex ia IIC T4 Gb

IR thermometers are not harmful, they do not emit radiation, only measure it like a digital camera.

The majority of IR thermometers have a measurement error specification, which shows their best accuracy. The surface being measured can also affect accuracy. Reflective objects result in lower measurements than the actual temperature, whilst non-reflective surfaces give higher measurement. The emissivity of a surface is how effective it is at emitting energy as thermal radiation, as such some IR thermometers have adjustable emissivity settings.
Distance to spot ratio is also essential in providing accurate temperature measurements, if an infrared thermometer is too close to its target area, heat can build up in the device. This can give false readings or damage the temperature sensors, therefore it is essential to always follow a manufacturers guidelines.

K-type thermocouple bead probe, conductive IS hard carrying case and User’s manual

Need a reliable way to keep close tabs on thermal changes in hazardous work environments? Go for this infrared thermometer from FLUKE. Its intrinsically safe design makes it ideal for use in volatile settings such as petrochemical plants. The unit comes with a mini-connector K-type thermocouple bead probe designed for use in applications with space constraints. A trigger lock function is on hand to prevent accidental activation and boost safety. This handy tool can capture and store up to 99 data points in its memory for later retrieval and analysis. An audible and two-colour visual alarm immediately alerts you when the temperature exceeds or falls below pre-set thresholds.

• Large backlit display for clear visibility in dimly lit environments
• Battery lasts up to 100 hours when the laser and backlights are off, for long-term performance
• Adjustable emissivity setting ensures precise and accurate readings
• Broad temperature measurement range between -40°C and +800°C to suit challenging applications
• Switches between Celsius and Fahrenheit measurements for versatile use

• Oil refineries
• Research laboratories
• Pharmaceutical industry

This infrared thermometer has a measurement accuracy of ±1%, so you can depend on it for precise temperature readings.